Model DB Series -Dry Polymer Preparation System

Polymer Wetting Assembly / Dust Control Module simply uses water to:

• Contain the polymer particles to prevent dust buildup
• Disperse the powder to prevent agglomerations
• Hydraulically shear the product to begin proper activation
• Transport the solution to the mix tank

Options

• Bulk Bag Forklift Framework (for low overhead applications)
• Hoist and Gantry arrangement with Bulk Bag lifting cross
• Allen-Bradley™ PLC and Panelview™ Touchscreen Operator Interface**
• Air Compressor if plant air is not available

Consult your SNF Floquip Representative for system sizing.
Allen-Bradley PLC and Panelview are registered trademark of Rockwell Automation.

System Parameters

• 300-3000 lbs./day (135-1350 kg/day)*
• 0.4-8.34 lbs./minute dry polymer feed rate (0.18-3.8 kg/min)*

Features

• Simple Installation and Operation
• Dust-free Polymer Wetting Assembly
• Solution without formation of agglomerations or "fish-eyes"
• Hopper access door for bulk bag opening
• Automatic rinse cycle
• Low Water Flow Protection
• Manual and Automatic operation

Utilities

• 70-100 gpm (265-380 L/min), 40-70 psi (2.7- 4.8 bar) required primary dilution water
• 120V, 30A required for preparation unit - Agitator and Transfer Pumps as required.
• 80 psi (5.5 bar), 30 scfm instrument air required - integral air compressor optional