SNF Polydyne, Inc.
- Home
- Companies
- SNF Polydyne, Inc.
- Products
- Model DH Series - Dry Polymer ...
Model DH Series -Dry Polymer Preparation System
The Dry Polymer Preparation Systems are designed for dependable operation. Years of field experience with dry polymer preparation, combined with the knowledge of the leading manufacturer of water-soluble polymers, is incorporated into every design.
Most popular related searches
polymer preparation
dust control system
hydraulic shear
dust control
wash water flow
water protection
water containment
dosing system
dust prevention
wash water
Polymer Wetting Assembly / Dust Control Module simply uses water to:
- Contain the polymer particles to prevent dust buildup
- Disperse the powder to prevent agglomerations
- Hydraulically shear the product to begin proper activation
- Transport the solution to the mix tank
Options
- Allen-Bradley PLC and Panelview Touchscreen Operator Interface**
- Air compressor if plant air is not available
* Consult your SNF Floquip Representative for system sizing.
** Allen-Bradley PLC and Panelview are registered trademarks of Rockwell Automation.
System Parameters
- 100-300 lbs./day (45-135 kg/day)*
- 0.4-8.34 lbs./minute dry polymer feed rate (0.18-3.8 kg/min)*
Features
- Simple Installation and Operation
- Dust-free Polymer Wetting Assembly
- Solution without formation of agglomerations or "fish-eyes"
- 2.5 cu. ft. Stainless Steel hopper
- Automatic rinse cycle
- Low Water Flow Protection
- Manual and Automatic operation
Utilities
- 70-100 gpm (265-380 L/min), 40-70 psi (2.7-4.8 bar) required primary dilution water
- 120V, 30A required for preparation unit - Agitator and Transfer Pumps as required
- 80 psi (5.5 bar), 30 scfm instrument air required - integral air compressor optional