- Home
- Companies
- Funke Kunststoffe GmbH
- Products
- Model DN/OD 160 - Becon Junction
Model DN/OD 160 -Becon Junction
With the Becon Junction, lateral pipes or side inlets can be quickly, easily and economically integrated into concrete and reinforced concrete pipes with circular and based cross sections according to DIN EN 1916:2003-04 - for new installation as well as for retrofitting.
The Becon Junction has an integrated socket DN/OD 160 and is available for main pipes DN 225, 300, 400, 500/600. The small drilling dimension of only 172 mm ensures that the statics of the concrete pipe are only minimally weakened. In addition, drilling the hole is easier than with larger drilling diameters. The integrated clamps made of chrome-nickel steels (V2A/1.4301) ensure misalign and pull-out safety.
The resin is used to protect the exposed reinforcement of the soffit in reinforced concrete pipes. The injected two-component resin protects the exposed reinforcement of the reveal in reinforced concrete pipes so that no corrosion occurs.
The patented clips in combination with the injected two-component resin ensures that the Becon Junction is anchored in the drilled soffit after professional installation and is resistant to pull-out and shear loads. The Becon Junction has an integrated adjustable socket. It ensures that lateral pipes can be adjusted within a range of 0° to 11°.
- precise subsequent connection to concrete and reinforced pipes at 90°
- drilling diameter of only 172 mm
- compact design, easy and quick to install
- the integrated adjustable socket can accommodate a stepless bend of up to 11° without any tension
- firm fit due to patented stainless steel clamps in combination with the injected Assil resin
- corrosion protection with Assil resin
- ideally suitable for rehabilitation and relining, to glue hat profiles into lateral sections or resin grouting – PVC-U is suitable for adhesives
Product Name:
Becon Junction DN/OD 160
Nominal Diameter Lateral Connection:
DN/OD 160
Nominal Diameter Main Pipe:
DN 225, 300, 400 & 500/600
Colour:
RAL 7037 (grey)
Material:
PVC-U (unplasticized)
Installation:
Manufacturers installation guidelines
Ares of use:
- Foul drainage and sewerage pipe lines
- Stormwater drainage pipe lines
- Combines sewer pipe lines
- Highway drainage pipe lines
- Private drainage pipe connections into main sewers
Features and Benefits:
- Adjustable socket 0°-11° (meets requirements of DWA-A 139)
- Tension free connection
- Resilient pH-Range 2-12
- Recyclable due to mono-material
- Saves time and costs as cutting of a main pipe section to install traditional junctions is not required when retrofitted.
- Original pipe bedding stays intact.
- Can be installed while pipe line is in service. No shut off the pipeline required