Model PN3211 - UV Detector
The PN3211 UV Detector provides an exceptional level of sensitivity and stability. As a high sensitive UV detector, the PN3211 has a noise level of 0.5×10-5 AU max., making it to one of most sensitive UV detectors (ASTM Standards).
- Greater Baseline Stability
Supplied as standard, a temperature-controlled flow cell eliminates inconsistencies caused by changes in absorbance due to shifts in room temperature. This helps increase the baseline stability and the analysis reliability.
- Superior Linearity - 2.5AU
Using newly developed signal processing technology, the stray-light correction function has been enhanced, and the linearity has been improved. This expanded linearity combines with various noise-reduction technologies to provide users with a wide dynamic range and allow for the analysis of your target compound and minor impurities in a single run.
- Internal Validation Protocol
The incorporation of a low-pressure mercury lamp for wavelength calibration ensures simple calibration in the ultraviolet region.
- Dual-Wavelength Measurement
Monitor two components in the UV range simultaneously.
- Z-DET-3211-001 Analytical, Peek
- Z-DET-3211-002 Analytical, Stainless Steel
- Z-DET-3211-003 Preparative, Stainless Steel
- Z-DL-PN3211 D2-Lamp, Pre-aligned, Longlife
190 – 700 nm
± 1 nm
± 0.25x10-5 AU max.
1x10-4 AU/h max. (250 nm, room temperature constant, air in cell)
3x10-4 AU/h max. (250 nm, room temperature fluctuation less than 2°C, air in cell)
4 - 35°C
Cell Temperature Range:
5°C above room temperature to 50°C, at 1°C steps
11 steps selectable (corresponding to time constant 0.02, 0.05, 0.1, 0.5, 1.0, 1.5, 2.0, 3.0, 6.0, 8.0, 10.0 sec)
0.0001 – 2.56 AUFS (selectable in 0.0001 AUSF steps)
Auto zero function, baseline shift function
1–5 nm, selectable in 5 steps
2–5 nm when W lamp is used
10 – 50 nm/sec, in 5 steps
output speed 1, 3, 10 nm/sec
Optical Path Length:
Wetted Surface Materials:
SUS316L, quartz, PFA
260 x 140 x 420 mm; 13 Kg
100/120/220-240 V, 50/60Hz