CETCO
Model SC-200 -Wetting Agent
FromCETCO
A liquid surfactant, SC-200 is a safe, clean, and cost-effective approach to waterwell development and rehabilitation. This wetting agent enhances the dispersing efficiency of other well rehabilitation products. SC-200 enables these products to enter into the pores and cracks of the encrustations, thereby accelerating the rehabilitation process.
Most popular related searches
well rehabilitation system
well rehabilitation
well pumping
well pump
water well development
pump system
compressed air
particulate matter
particulate matter removal
pump test
SC-200 is an ideal wetting agent used in the rehabilitation of old and new wells. SC-200 enhances the dispersing efficiency of the BMR in the removal of clay and silt. Additionally, LBA and DPA are more effective when used in tandem with SC-200.
- Increases water production in new and old wells
- Minimizes sand pumping in test development
- SC-200 is nontoxic, non-corrosive, and nonflammable
- Speeds penetration of cleaning products by increasing the surface area of the materials to be removed and/or cleaned
- Test well pH before starting treatment. Disconnect pumping system.
- Calculate quantity of SC-200 required using the Dosage Table. Normal dosage is 5-7% solution. If gravel pack is present, the volume of water in it should be accounted for as part of the total well volume (typical porosity of gravel pack is 30-40%).
- Pour SC-200 directly inside the c asing. A gitate the well by high pressure jetting, compressed air, or surging for 1-4 hours.
- If only developing the well, pump the well until all the surfactants and particulate matter are removed from the well. If SC-200 is being used as a wetting agent for well rehabilitation, you must purge the SC-200 from the well before adding other well rehabilitation treatment products directly into the well.
5 gallon pail, 27 or 28 per pallet. All pallets are plastic-wrapped.