Henan Wood Machinery
Model WD -Log Sliding Table Saw
The sliding table saw can be customized for two operating modes, CNC or manual, according to customer needs, and can also be equipped with movable wheels to facilitate outdoor operations. The structure of the sliding table saw is different from the above two band saws. It no longer uses a band saw blade for cutting, but directly uses two hard bands saw wheels for cutting. The cutting range of the sliding table saw is the diameter of the band saw wheel, which is more suitable for some small wood processing plants.
Most popular related searches
Rules for the safe use of band saws
- The thickness of the band saw blade should be compatible with the matched band saw wheel. Avoid using large-thick saw blades for small wheels, which may cause breakage and injury.
- The saw tooth should be sharp, and the tooth depth should not exceed 1/4 of the width of the saw blade.
- The welding of the band saw blade should be firm and flat, the joints should be more than 3 woods, the length between the two joints should be more than 1/5 of the total length, and the thickness of the joints should be basically the same as the thickness of the saw blade.
- Strictly control the transverse cracks of the band saw blade, and the excessively long cracks should be cut off and re-welded.
- The track of the sports car of the large band saw machine should be straight, with travel switches at both ends, and warning bars should be set on both sides of the sports car. How to equip the safety device of the circular saw.
