- Home
- Companies
- Zataiot International Limited
- Products
- Model ZWQ-CT1 - Residual Chlorine ...
Model ZWQ-CT1 -Residual Chlorine Sensor
ZWQ-CT1 Residual Chlorine Sensor can be used to detect the Residual Chlorine value of water quality. It can be used in harsh environment and the monitoring data is stable and reliable. ZWQ-CT1 is a residual chlorine intelligent sensor using RS485 communication interface and Modbus RTU standard protocol. Corrosion resistant shell, built-in PT1000 temperature sensor and compensation algorithm, suitable for all kinds of harsh working environment.
MONITORING PARAMETERS: Residual Chlorine
MONITORING PRINCIPLE: Clark Current
POWER-IN: DC12/24V / Solar Power
INTERFACE: RS485/RS232/Wifi/BT/LTE
MODEL: ZWQ-CT1
Measuring Principle: Clark Current
Measure Range: 0-2mg/L
Measure Resolution: 0.001mg/L
Measure Accuracy: ±1%
Flow: 250-500mL/min
Water Quality: pH: 4~9
Conductivity: 10-50000uS/cm
Interface: RS485(Modbus RTU)
Material: CPVC
Electrode Cable: 3m
Electrode Dimension: D25mm L188mm
Power: DC12/24V
- Tap water and secondary water supply
- Swimming pool
- High-efficiency process control is realized by precise real-time digital communication.
- It will not be disturbed by turbidity or dyeing (based on the principle of current measurement).
- Integrate temperature compensation function to ensure that measurement error is not affected by temperature change.
- The correlation between flow rate, cross-sensitivity, water pollution and biofilm media of the capped sensor is greatly reduced.
- The measuring sensor is protected by the film cap and immersed in the electrolyte to adapt to more and different measuring techniques.