Tethys Instruments SAS - HORIBA Advanced Techno
  1. Companies
  2. Tethys Instruments SAS - HORIBA ...
  3. Products
  4. Tethys - Model EL300 - Multi-Channel ...

TethysModel EL300 -Multi-Channel Water Controller

SHARE

The EL300 is a universal water controller based on a modular concept. The EL300 can adapt to many different probes and configurations, mono or multi-channel. It allows the connection of one or several probes for each parameter among pH, ORP, dissolved oxygen, conductivity, chlorine, total suspended solid (TSS), total dissolved solid (TDS), temperature and turbidity in the limit of 16 channels. A very user-friendly interface can display all the values as well as graphs of the recorded values with periods from 10 minutes to one month. A USB port allows to transfer the recorded measurements that may be imported to Excel for treatments or graphs. A new web-based interface allows the control and the troubleshooting at distance using an internet browser on a computer, tablet or i-phone.

Most popular related searches
Quenching Fluorescence based Oxygen Probe
  • The dissolved oxygen probe is based on the fluorescence method for a lower maintenance and higher stability.
  • At the opposite of galvanic and polarographic probes, the fluorescence based probes requires no electrolyte refill, no membrane change and no routine calibration. No flow is needed because there is no oxygen consumption.
  • They also perform very well in harsh environments that normally destroy other conventional sensors.
Robust Industrial ProbesAll the probes are specially designed for harsh environments with high level of suspended solid.

Modular Concept The EL300 main electronics board includes 12 sockets that can receive input or output modules.

Input modules concern mainly pH and conductivity, while output modules can be 4-20 mA output or relays for high or low alarms. A RS485 port directly connects to a serie of RS485 probes for dissolved oxygen, turbidity (high range and low range) or pH with long cable distance. Several probes can be connected in parallel on the same RS485 port. A scan function in the software automatically recognises the network of probes connected.