Lev-Co - Model P2D2-R3 -1150 CFM- 14-055 -Multi-Purpose Portable Vehicle Exhaust System

The Multi-Purpose P2D2 is an "All-in-one" design with the purpose to capture 99%+ of all air-born emissions "at-Source"before the emissions reach the operators` breathing zone. This unit is ideal for capturing smoke and fumes for cars, busses, motorcycles, gas & diesel trucks & heavy equipment.

The system is suitable for servicing entire facilities, all bays (extra door ports may be required), and can service both overhead and under-carriage exhaust pipes. With ball-bearing castors, the unit is easily transported to and from job sites, under the garage door, or through door/wall exhaust. This portable unit is centered around one-person deployment and operation, allowing the operator to position the nozzle on an OVERHEAD stack without the use of a ladder.

This Plug & Go unit has a sturdy trolley that allows for storing all ventilation components, easy-to-store exhaust hose, and locking casters that ensure the base unit stays in place during use. The powerful exhaust fan removes exhaust gases directly into the atmosphere, with a typical flow rate of 1150CFM for the system.

Main options include:

• Exhaust Hose: Up to 100 feet length and 2500 degrees F. Temp. rating
• Overhead Stack Adapter
• Variable Frequency Drive
• Hose Accessories

• Portable & Easy to position - 6 Heavy-duty casters (2 straight, 4 swivel)
• “All-in-one” design – “on-cart” storage for all hoses, hoods, etc.
• All steel heavy duty construction - 3/14/16 ga.
• Spark Proof design and construction
• Environmentally friendly VFD control – Variable exhaust rate to ensure energy-saving efficiency
• 6.5``/8`` dia. Hoses
• Engines up to 150 HP @ max RPM & Load select: P2D2-R2-1.5HP
• Engines up to 200 HP @ max RPM & Load select: P2D2-R2-3HP
• Engines up to 300 HP @ max RPM & Load select: P2D2-R2-5HP
• Engines up to 400 HP @ max RPM & Load select: P2D2-R2-7.5HP
• Engines up to 500 HP @ max RPM & Load select: P2D2-R2-10HP
• Equipment over 500HP - Call Lev-co for exact product selection

• All-in-one:The whole assembly has the ability to store everything related to the unit, making teardown and setup times much shorter, as well as taking up less storage space
• Maneuverable:with the use of ball-bearing castors, moving the unit around can easily be done by one person
• Point-source extraction:With 25 feet of flexible hose, and the maneuverability of the system, fumes can be extracted before escaping the source
• Energy-saving:With the use of a VFD, you can program the suitable flowrate for any application, which is energy-saving, and efficient
• Distance coverage:With the use of exhaust up to 100 feet long, point-source extraction can be achieved from almost anywhere within a 100 foot distance to outdoor access

Top 5 contaminants/processes/applications:

• Diesel Exhaust Fumes
• Car Exhaust Fumes
• Welding Fumes
• Smoke
• Chemical Fumes

Don`t see your contaminants? Give us a call! 1-888-862-5356 or Click our instant chatbox.

IMPORTANT: For your Health and Safety, make sure to talk to an application engineer before purchasing.

P2D2-R3

Portable Vehicle Exhaust system. 1.5HP 115V/1/60. 1150 CFM System comes complete with:

• 25` of 8" diameter exhaust hose
• 10` of 6" diameter inlet hose
• 6" to 8" diameter Vice-Grip nozzle - 600 degree silicon rubber for bottom exhaust
• 6 to 10" diameter nozzle - 15` of 600 degree silicon extension hose for top exhaust
• 15` power cord
• Motor Starter and Overload protection
• Storage for both the exhaust and inlet hoses
• CSA approved

AS PER CANADIAN LAW; this unit is approved by CSA field evaluation prior to shipping in order to meet Canadian Laws and for your additional safety

P2D2-R3-8D

Portable Vehicle Exhaust system. Fan ordered seperately with motor mounting plate to suit.

• 25` of 10" diameter exhaust hose
• 10` of 8" diameter inlet hose
• 8" diameter Vice-Grip nozzle - 600 degree silicon rubber for bottom exhaust
• 8 to 10" diameter nozzle - 15` of 600 degree silicon extension hose for top exhaust
• Storage for both the exhaust and inlet hoses
• CSA approved

AS PER CANADIAN LAW; this unit is approved by CSA field evaluation prior to shipping in order to meet Canadian Laws and for your additional safety

• Main System w/ Flexi Extraction Arm Inlet - 6.5" diameter
• Main System w/ Flexi-II Extraction Arm Inlet - 8" diameter
• Exhaust Options
• Hose with temp range up to 850°F (455°C)
• Over-head Stack adapter - High Temperature Rubber
• Variable Frequency Drives
• Accessories