- Home
- Companies
- Hangzhou NIHAO Environmental Tech Co., ...
- Products
- NIHAO - Air Tube Diffuser
NIHAO - Air Tube Diffuser
Fine Bubble Tube Diffusers can be connected on one side or in pairs to different rectangular and round tubes (ABS material) with the appropriate adapter. The membranes are manufactured with premium quality EPDM material and are available with fine or coarse-bubble perforation. The support tubes(ABS)can be reused when membranes are replaced. The NIHAO 2" Tube diffusers are the best solution for long and narrow aeration tanks. Having the opportunity to choose different materials, connection threads, and size makes NIHAO Smart tube diffuser fit any type of wastewater. The Tube Type Air Diffuser in NIHAO are produced with the latest technology and used in wastewater treatment plants.
The projection of each diffuser of NIHAO was done after the Research and Development study that response to the requests of wastewater treatment plants. Materials used in NIHAO fine bubble diffusers are carefully selected according to the processes of wastewater treatment plants and tested regularly before shipment. We are professional fine bubble TUBE DIFFUSER manufacturers, suppliers and factory in China. These EPDM Membrane Fine Bubble Tube Diffusers are widey used in wastewater treatment plant, aeration tanks etc.
Acetate organic solvent fine chemical products
3600 sets of liftable tubular aeration
After three months of use, the aeration system was severely blocked, the fan pressure increased, and the dissolved oxygen efficiency decreased, making it impossible to use normally. In the meantime, the imported membrane tubes and the other three domestic membrane tubes were replaced, and the situation could not be improved.
the membrane tube can be replaced for about 24 months after normal use.
- Bimodal Molecular Weight EPDM Original GumReduced Ventilation Resistance 20%
Using EPDM with "bimodal" molecular weight distribution, EPDM with "bimodal" molecular weight distribution, and EPDM with controlled long-chain branching, EPDM has a good tear resistance while having high strength and high resilience. Compared with similar products, the ventilation resistance is reduced by 20% when the thickness and the aperture is the same.
- Platinum Hydrosilylation Reaction SulfurizationTear strength increased to above 35KN/m
Platinum vulcanizing agent is a vulcanizing agent with metal platinum as the main active component. Compared with the traditional bis-di-tetra vulcanizing agent, the product has a smaller pressure change and higher mechanical properties.
- Unique Material Anti-blocking DesignNo risk of hole plugging for 8 years
Optimize the material formula, reduce the extraction of the rubber compound material by the sewage medium, The introduction of hydrophobic materials in the formula increases the polarity of the membrane surface, and has always achieved the purpose of reducing the adhesion of dirt.
- Oil-free Formula Design5-year elastic decay rate < 20%
The softener will affect the vulcanization and reduce the cross-linking efficiency. At the same time, the softener will enter the macromolecular gap, affecting the formation of cross-linking bonds and reducing the cross-linking the density of the cross-linking network. Therefore, the compression deformation of the cross-rubbing compound increases. Oil-free formula is adopted, 5 Annual elastic decay rate < 20%