- Model Nor150 - Sound and Vibration Analyser

From

0

The Nor150 asound level meter sets new standards in user-friendliness featuring the largest colour touchscreen in a handheld meter on the market today. Featuring a large 4.3” true colour touchscreen, the Nor150 provides the user friendliness of a smartphone. Further features include; two measurement channels, built in web server, camera, GPS and advanced voice and text notes bringing the sophistications normally found in laboratory instrumentation out in the field. Connect your smartphone, pad or PC and take full control of the instrument. Add photos and voice notes obtained on your smartphone or pad seamless integrated with markers to your noise data.

  • Environmental noise
  • Building acoustics
  • Sound intensity
  • Noise monitoring
  • Product noise testing
  • Noise in the workplace
  • Infrasound
  • Noise nuisance recorder
  • Front end for Nor850
  • General noise and vibration measurements

  • High Precision Class 1 sound level meter and frequency analyser.
  • Single or dual channel.
  • Large colour touch-screen (4.3”).
  • Real keyboard for quick operation in challenging environments.
  • Intuitive user interface with graphical icons for selection of measurement mode and custom-made user setups.
  • Built in webserver for communication through the internet from anywhere in the world via LAN, USB, WLAN, 3G/4G modem.
  • Voice and text notes, built in GPS and camera help you document your measurements.
  • Wide frequency range for vibration and low frequency measurements (0,4 Hz – 20kHz in 1/3 octave band).
  • 120dB measurement range.
  • Extensive trigger system for reports, audio recording and camera.
  • Seamless integration with Nor850 software.
  • Multi language support.
  • Extensive on board help system.

The Nor150 Analyser is designed to be expanded and upgradeable to give you a complete measurement tool for years to come. Norsonic’s retrofit policy ensures regular software updates with new features and new options followed by a 3 years warranty.

  • Nor150 basic
  • Option 1: Built-in camera and GPS
  • Option 2: Second channel
  • Option 3 : 1/1 and 1/3 octave band filters
  • Option 4: Audio recording and markers
  • Option 5: Sound Intensity
  • Option 7: Signal generator
  • Option 8: Reverberation Time decay and calculation of T20 and T30
  • Option 9: Complete Building Acoustic mode
  • Option 11: Internal web server with enhanced noise assessment functions

The Nor150 sound and vibration analyser is supplied with ½” preamplifier Nor1209 and the ½” measurement microphone Nor1225. It conforms to the latest revision of the following National and International standard including amendments, all type 1 / class 1; IEC61672, IEC60651, IEC60804, IEC61260, DIN45657, ANSI S1.4, ANSIS1.11, and ANSI S1.43.

Measured Parameters

  • Simultaneous measurement of SPL, Leq, LeqI, LMax, LMin, LE, LEI, LPeak, Ln and Tmax5.
  • Time weighting functions: Fast, Slow and Impulse (Simultaneous).
  • Spectral weighting functions: A, C and Z - weighting (Simultaneous).
  • Frequency analysis: 1/1 and 1/3 octave real time filters from 0,4 Hz to 20 kHz.
  • Statistical calculations: 8 individual adjustable percentiles from L0,1% to L99,9%, The statistical calculations are performed in real time within each frequency band and for each profile period if period length is set longer than 2 minutes. User can select between Fast or Slow time weighting as basis for the statistical calculation.

Measurement control

  • Time profile resolution: 10ms – 24 hours including full frequency spectra.
  • Overall measurement duration: 1 sec – 7 days. (If set to Repeat or Synchro mode a new measurement will be started automatically, with no time gap between each measurement.)
  • Back erase in Pause mode: 0-20 sec free selectable graphical back erase.

Audio recording
12 and 48 kHz sampling rate / 8 , 8MU, 16 and 24 bits / 5 sec pretrigger.

Measurement range

  • One range covering 120dB without any range adjustments.
  • Self noise measured with ½” microphone with a nominal sensitivity of 50mv/Pa: 17dBA.
  • Maximum RMS level 137dBA, Maximum Peak level 140dB PeakC.
  • The high SPL mode enables measurements up to 194dB using a suitable 1/4” microphone.
  • Built in GPS for position and exact time synchronization.

Display
4,3” colour display, ¼ VGA with capacitive touch. Scratch-proof display glass with anti-smudge coating.

GPS/Camera

  • Built in GPS for position and exact time synchronization.
  • Built in Camera for annotation before, during and after a measurement. Camera can be set up to capture noise event based pictures.

Datastorage / Datatransfer

  • Internal memory: 350MB
  • Micro SD card: Up to 64 GB, supports XC and HC standard.
  • Data can also be stored on an external USB stick.
  • Data transfer via LAN, USB and high speed RS232. Supports WLAN and GPRS - 3G/UMTS - 4G/LTE via USB. Internal web server may push data to any server or external device.

Inputs

  • Microphone input: Two microphone inputs (Second channel optional). Supports standard 7 pin lemo preamplifiers including SysCheck, Microphone heating and IEPE. Polarization voltage: 0, 70 and 200V. Preamplifier voltage is +- 15V. Also suitable for vibration measurements connecting IEPE accelerometers and geophones.
  • Comment microphone: Via 3 pin mini jack.

Analogue outputs

  • AC out, 100mV full scale on 15 pin I/O socket.
  • 3 pin mini jack headphone socket for replay of voice notes, listen to microphone AC signal or replay of audio recordings. Comment microphone for voice notes is connected to same plug.
  • Signal generator on 15 pin I/O socket with Pink, White, Band-pass filtered, sine and impulse noise.

Power

  • Rechargeable 3,5Ah Li-Ion batteries with fuel gauge.
  • External power 10-28Vdc 3-5Watt.
  • Typical battery lifetime: 8 hours.
  • Dimensions (ex. preamplifier and microphone LxWxH): 240 x 82 x 39mm.
  • Weight (including preamplifier and microphone): 700g.

Customer reviews

No reviews were found for Norsonic - Model Nor150 - Sound and Vibration Analyser. Be the first to review!