Contec GmbH
- Home
- Companies
- Contec GmbH
- Products
- contec - Model Type 1.500/980, Flow ...
contec - Model Type 1.500/980, Flow Rate 190 Nm³/h -Oil Mist Separator
FromContec GmbH
COMS-Type: COMS-Type 1.500/980, Flow rate 190 Nm³/h.
Most popular related searches
oil mist separation
oil mist separator
oil mist
mist separator
Zone 1 hazardous area
oil separation
blower unit
oil recycling system
explosive atmosphere
exhaust air purification
Installation of the Oil Mist Separator on:
- Lube oil systems (LOS) of gas and steam turbines
- Vacuum pumps
- Rotating machines
- Compressors
- Large-scale compressors
- Crankdrives
- Technical Task: Filtering, separation and regaining high-quality lubrication oil including all its additives
- Operational Task: Avoiding oil leakage (at bearings etc.) by creating a permanent slight negative pressure in the lube oil system
- Global/environmental Ttask: High-efficiency filters prevent the emission of oil mist into the atmosphere. Protecting the environment by reducing oil mist emission down to < 3-8 mg/m³, cleaner than the German TA regulations of clean air and longterm protection of the environment
- High quality based on 25 years of experience and multiple well-tested and proven technology
- Modular system allows a simple constructional adjustment to the respective application
- Rapid and long-term supply of spare parts
- Long service life and easy change of the filter elements
- Automatic oil recycling system
- Environmental Technology Price for 1990
- Project-specific planning and construction
- Various options
Explosion-proof versions/ATEX
- The complete Contec Oil Mist Separator is certified in compliance with EC directive 94/9/EG (ATEX 100a) and can be operated in hazardous areas
- Up-to-date in terms of state of the art safety technology
- Suitable for application in explosive gas atmospheres category 2 and 3 (group II)
- If requested taylor-made configuration in accordance with the ATEX directives for zone 1 (explosive atmospheres are likely to occur) or zone 2 (seldom and short-term explosive atmospheres) group IIC (propane, ethylene, hydrogen)
- Drives Ex-pressure resistant, VIK, special voltages etc.
Redundant Series
- Redundant motor/blower unit on bracket or frame construction
- Motor/blower units are controlled separately by hand and check valves
- Motor/blower unit can be dismantled easily due to hard valves before and after blower
- Easy maintenance due to laterally reversed construction of motor/blower units
Bypass
- Complete bypass with integrated check valve
- Compact integration of a bypass system that is normally installed separately to the OMS/OME
- „Emergency“-bypass to avoid over pressure in the LOS
Bypass of external air
- Hand valve for admixing system-internal, purified exhaust air to control the negative pressure
- Suitable for applications in Zone 1 hazardous areas or in areas with very dirty or polluted environmental air
Additional micro filter head piece
- Additional downstream air filter cell H11 for aerosol-free exhaust
- Reduction of oil aerosols in the exhaust air to less than 2 mg/m³
With hinged cover
- Specially developed mechanical eccentric lifter
- Slight lifting of the filter cover and easy replacement of filter elements, especially when no indoor crane is available
Series without an blower
- Filter system without motor/blower unit
- Filtration and separation of oil mist for lubrication systems with sufficient positive pressure