Digtor - Model 22 C-8 -Oil/Petrol Centrifuge

Designed for oil/petrol applications according the standards: ASTM D 91, D96, D 893, D 1796, D2273, D2709, D 2711, D 4007, D 5546, API 2542, API 2548, BS 4385, ISO 3734, ISO 9030, IP75, IP 359, NF M07-020, DIN 51793. Fits Babcock bottles

Tubes upright on rest.

Gas Release System (GRS): Gas release system (optional); pre-installation included.

TFT color touch screen, visible from more than 3 m.:

• Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS and unbalance location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on screen based on accessories configuration.
• Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
• Timer from 1 sec. to 99 hours programmable in 1 sec. steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
• ULS: Unbalance location system indicating on the screen the number of the bucket which produces the unbalance switch off.
• Start delay: To program the time at which the cycle is to begin.
• Linked program: Permits the linking of up to 8 consecutive programmes without the need of user intervention.
• 40 programmable memories, with protection under password.
• Several acoustic and visual messages showing the user the situation of the device.

• Lid provided with security systems:
  – Automatic lid lock system, motorized with double lock.
  – Emergency lid-lock release.
  – Locking and protection against opening along the run.
  – Lid dropping protection.
  – Port in the lid for calibration and operation checking.

• Unbalance detection and switch off.
• Protection safety ring between the centrifugation chamber and the housing.
• Chamber of centrifugation in stainless steel (easy cleaning).
• Rotors and adapters autoclavable, easy to install by the user.
• Automatic disconnection for energy saving up to 8 h.

• Preheating program with rotor spinning and selectable temperature. It allows keeping the chamber at working temperature before starting the process.
• Regulation of the room temperature +5°C (41°F) to 80°C (176°F) in 1°C/1° F steps Programmable in °C o °F.
• Temperature sensor inside the chamber. Overheating protection.
• Internal isolated avoiding heat loss.