- Home
- Companies
- Pall Corporation
- Products
- Pall - Model HLP6 - Oil Purifier
Pall - Model HLP6 -Oil Purifier
With a design based on 30 years of actual field experience, the Pall HLP6 oil purifier combines the excellent efficiency of mass transfer purifiers with an exceptional level of reliability and ease of use.
Water contamination in oil systems is responsible for major maintenance and operational problems of critical components in lubrication and hydraulic circuits. From power generation turbines to paper machines, these problems include:
- Increased corrosion in the system, especially at bearing locations
- Increased oil oxidation and acid build-up
- Sluggish response of control systems
Our experience in the field has shown that it is never enough to remove free water: centrifuges and coalescers alone cannot protect bearings against corrosion and fluid degradation.
In a typical oil system, temperature swings constantly change the dissolved water content of the oil. At the reservoir location it is critical to remove not only free water, but also a large portion of dissolved water. This is the only way to ensure that free water will not appear when the fluid goes through the cool parts of the system, especially when an oil cooler is used downstream of the reservoir.
Power Generation
- Main turbine lube oil
- Boiler feed pump reservoir
- Transformer oil
- EHC systems
Pulp and Paper
- Wet end/dryer lube
- Press section lube and hydraulics
- Steam turbine lube and hydraulics
Primary Metals
- Roll mill automatic gauge control hydraulics
- Roll mill gear and pinion lube systems
- Roll grinder lube systems
Light Industrial
- Bulk oil reclamation
- Blow molding
- Injection molding
- Machine tool hydraulic oils
- Automotive transfer line hydraulic oils
Fuels and Chemicals
- Extruder gear boxes
- Compressor and turbine lube oil
- Boiler feed pump reservoir
Improved System Performance
- Fewer costly operational delays
- Increased system reliability
- Less downtime resulting from service interruptions
- Can work on higher viscosity oils (up to 1,000 cSt)
- Lower power consumption
Extended Fluid Life
- Greatly reduced oil change outs due to contamination
Reduced System Wear
- Less frequent component changes needed
- Smaller parts inventory required
Reduced Fluid Disposal Costs
- Sharply reduced need to dispose contaminated fluids
- Reduced waste oil disposal costs