Real Tech - Model T Series -Online TSS Analyzer

Characteristic: Technical Data

• Path Lengths: 1 mm, 2 mm, 4 mm, 8 mm, 25 mm, 50 mm, 100 mm, 150 mm
• Parameters: Total Suspended Solids (TSS)
• Range: Depends on model selected. Refer to range chart on next tab.
• Units: mg/L, ppm
• Sampling Time: 10 seconds
• Calibration: Factory parameter calibration allows field adjustment as required.
• Cleaning: In-situ cleaning makes cleaning quick and easy. Automatic chemical cleaning is optional.
• Self-Diagnostic: Detection and diagnosis of internal system fault
• Operator Interface: Five push buttons to control a comprehensive hierarchical menu system
• Display: 4 line x 20 character backlit LCD with LED alarm indicator
• Alarms: Dry contact terminals allow for operator configurable alarms for:
• high and low set points, low lamp output, leak detected, system fault, etc.
• Humidity Control: Humidity sensor with large regeneratable desiccant system
• Outputs: Self-powered 4-20mA, RS232 serial for PC
• Wavelength: Near infrared (NIR)
• Light Source: LED
• Flow Rate: 300 - 1000 mL/min
• Pressure Rating: 20 PSI maximum
• Fluid Connections: 1/4" OD tube push-in fittings
• Electrical: 24VDC 40W power adapter (accepts 90-250VAC 50/60Hz)
• Storage Temp: -20 to 60°C (-4 to 140°F)
• Operating Temp: 0 to 45°C (32 to 113°F)
• Enclosure: NEMA 4X, wall mountable
• Weight: 22 lb (2000 series) or 24 lb (4000 series)
• Dimensions: 17”H x 14.25”W x 7.5”D (2000 series) or 17.75”H x 15.5”W x 6.75”D (4000 series)
• Warranty: 2-year limited warranty (Extended care packages available)
• Analyzer Upgrades: High Temp. Upgrade I, High Temp. Upgrade II, Cellular Modem, Dual Transmitter

* Technical Specifications are subject to change without notice.