Flowline Inc.
- Home
- Companies
- Flowline Inc.
- Products
- Switch-Tek - Model LO10 - Optic Liquid ...
Switch-Tek - Model LO10 -Optic Liquid Leak Detection Switch
FromFlowline Inc.
APPLICATION: The general purpose optic leak switch provides liquid leak detection in and around secondary containment sumps, tanks and piping systems with a 1A relay output. Media examples include sulfuric acid and sodium hypochlorite. The submersible PP or PFA leak switch sensor is mounted through the containment wall or within the interstitial space, and connected to a PLC or relay controller.
Most popular related searches
liquid leak detection system
liquid leak detection
liquid leak
leak detection
secondary containment sump
pipe system
containment sump
corrosive liquid
sodium hypochlorite
water supply
- Rugged polypropylene or PFA Teflon® sensor and cable for corrosive liquids
- 60VA SPST relay selectable NO or NC via power supply wiring polarity
- Sensor may be located up to 1000’ from a Flowline relay controller
- Orientation: Universal
- Accuracy: ± 1mm in water
- Repeatibility: ± 0.5mm in water
- Supply voltage: 12-36 VDC
- Consumption: 25 mA maximum
- Contact type: (1) SPST relay
- Contact rating: 60 VA, 1A maximum
- Contact output: Selectable NO / NC
- Process temp.: F: -40° to 176°, C: -40° to 80°
- Pressure: 150 psi (10 bar) @ 25º C, derated @ 1.667 psi (0.113 bar) per ºC above 25º C
- Sensor rating: -1XX5: NEMA 6 (IP68), -2XX5: NEMA 4X (IP65)
- Sensor material: -1XX5: PP, -2XX5: PFA
- Cable jack. mat.: -1XX5: PP, -2XX5: PFA
- Cable type: 4-conductor, shielded, #22 AWG
- Cable length: 10’ (3m)
- Process mount: 3/4” NPT (3/4” G / Rp)
- Mount. gasket: Viton® (G version only)
- Classification: General purpose
- Compliance: CE