Chemco, Inc.
Chemco - Model Chemdrill MUD 500 -Organic and Synthetic Polymers
FromChemco, Inc.
An organic and synthetic polymer formula designed to form a high performance drilling mud that will aid in stabilizing brittle and fragile formations such as overburden, sand and gravel. Mixed with Chemdrill LUBE, it becomes an "all-in-one" advantageous alternative to mixtures of drilling mud and bentonite. It dissolves quickly in clean or brine water to form a very high viscosity drilling mud. It will also allow to effectively encapsulate and remove drill cuttings quickly, lubricate the drilling rod and reduce the torque.
Most popular related searches
drilling mud
drilling equipment
drill fluid
drill cuttings
drilling rod
drilling fluid
water hardness
water conditioning
drilling lubricant
bentonite
For optimal performance, it is recommended to premix one part of Chemdrill MUD 500 with 3 parts of Chemdrill LUBE and introduce the premix in the drilling system according to the following dosages:
- Used as is : 1.5 to 3 kg per 1,000 Liters of water
- Pré-mixed with Chemdrill LUBE
- 1 to 2 liters per 1,000 Liters of water (normal conditions)
- 2 to 4 liters per 1,000 Liters of water (Hard conditions)
- Will stabilize even the most unstable formations: overburden, sand, gravel, shale, etc..
- No need for bentonite
- Reduces torque and drag
- Economy: 100% concentrated powder form.
- Dissolves quickly in clean or brine (KCl or NaCl) to form a very high viscosity solution.
- Increases rate of penetration.
- Improves core recovery.
- Non-toxic.
- The use of Chemdrill LUBE premixed with Chemdrill MUD 500 will improve the overall drilling fluid system’s performance