Ortis - Model Pro -Robotic Milling System
ORTIS Pro is a robotic milling system able to produce any type of model necessary to create custom orthoses and prosthesis, leg-foot braces, scoliosis treatment corsets, foam aesthetic covers, orthopedic seats, prosthesis sockets, cranial correction helmets.
ORTIS PRO represents the intermediate configuration that allows you an average daily production of 10-15 models with a working area of 28x28x48 in. All the production needs are satisfied by this system that offers you to choose between different variants to the standard configuration.
The system is installed on an industrial floor with walls and partitions that delimit its access area; inside this area the robot, the turntable and the presetting laser (that measures the real tool length) are fixed on the ground. In standard configuration the tool change is manual.
System Programming
A license of our ARPP® software ships with the system. ARPP® is powered by 5-axis a tool path generator (ARPPCAM), and allows for a precise ahead-of-time 3D simulation of the milling and material removal process.
Open System
ORTIS can be used with any 3D scanner or software that makes use of industry-standard formats (STL, AOP, VRML, …).
ABB, 6 axes, 20 kg payload on the wrist, working area of 1600 mm
In-house designed, it is the 7th interpolated axis. 28 x 28 in aluminum working plate, 60 rpm
Possibility to have an additional turntable or fixed table to increase productivity.
The standard setup includes a laser guide to perform automatic tool length calibration.
Blocks up to 28x28x48 in. Possibility to expand the the supporting plate for bigger blocks.
Minimum 6 bar
A license of our ARPP® software ships with the system. ARPP® is powered by 5-axis a tool path generator (ARPPCAM), and allows for a precise ahead-of-time 3D simulation of the milling and material removal process.
ORTIS can be used with any 3D scanner or software that makes use of industry-standard formats (STL, AOP, VRML, …).
System minimum area: 3000x3000x2700 mm
Contol unit area: 1000x1000x2000 mm.
Robot + base : 550 kg, Turntable: 270 kg
Control unit: 250 kg
380VAC / 480 VAC three phase, 50-60Hz, 12 KVA (4,5 kw average consumption)