Companies
PCE Instruments India Private Ltd.
Products
PCE Instruments - Model PCE-RTD 20 - ...

PCE Instruments - Model PCE-RTD 20 -Process Calibrator

FromPCE Instruments India Private Ltd.

SHARE

Simulation and Measurement of Resistance & Pt Sensors, Current and Voltage / Li-Ion Battery / Continuity Checker / Ramp Function. The RTD process calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD process calibrator is able to be used as a calibrator for temperature measuring devices. In addition to the simulation of resistors, the RTD calibrator has a measuring function for voltage, current and resistance. Both functions work independently. Furthermore, both connections are galvanically separated from each other.

Most popular related searches

temperature monitoring system

temperature monitoring

temperature sensor

temperature calibrator

The RTD process calibrator has many different characteristics for RTD sensors, so that a perfect calibration of thermometers of various kinds is possible. The RTD process calibrator has an accuracy of 0.02% in all measurement ranges and measurement functions. In addition to the direct specification of temperatures or resistances, the RTD process calibrator can be operated in ramp mode. Here, the user can decide whether the ramp should be run indefinitely or at defined intervals.

The PCE-RTD 20 RTD process calibrator is equipped with a mini-USB interface. This jack can be used to load the RTD process calibrator. Furthermore, recorded data can be transmitted via this interface.

Simulation and measurement mode
Battery operation
Graphic LCD
24V supply for current loops
HART compatible
Manual mode & ramp function
Continuity test
Data logger function

Compatible RTD sensor:

Pt10 (385), Pt50 (385), Pt100 (385), Pt200 (385), Pt400 (385), Pt500 (385), Pt1000 (385), Pt10 (3926)
Ni100 (672), Ni (618), Ni120 (672), Cu10 (427), Cu50 (427), Cu100 (427)

General Specifications PCE-RTD 20:
Display modes:

Measurement: mA / V / Ω / RTD
Simulation: Ω / RTD

Temperature units: ° C / ° F / K
Current of RTD measurement: About 300 μA
Maximum current simulation:

3-mA (0 ... 650 Ω)
I < 2V / Rsim (650 ... 4000 Ω)

Maximum input voltage: 30V DC
Temperature coefficient: <30 ppm
Input impedance:

Voltage measurement:> 1 MΩ
Current measurement: 10 Ω

Response time: <100 ms
Refresh rate display: 10 Hz
Data storage:

Internal memory
150000 readings

Interface: USB 2.0
Display:

2.4" TFT LCD
240 x 320 pixels

LED illuminated
Output voltage current loop: 24V DC / 24-mA
HART mA loop resistance: 250 Ω ± 20%
Special features:

Step and ramp function
Automatic and manual
mode √x, x2: For the measuring function

Continuity test: Adjustable threshold up to 100 Ω
Power supply: 3.7V / 2300-mAh Li-ion battery
Charging time: About 5 h
Power adapter:

Input: 100 ... 240V AC / 50/60 Hz
Output: 5V / 1 A DC

Battery life:

Approx. 15 h: Simulation and measurement with low LCD illumination
Approx. 8 h: Measurement with low LCD illumination

Dimensions: 162 x 82 x 40 mm / 6.4 x 3.2 x 1.6 in
Weight: About 300 g / < 1 lb
Degree of protection: IP20
Operating conditions: Battery operation: 0 ... 55°C / 32 ... 131°F, 30 ... 90% RH Mains operation: 0 ... 45°C / 32 ... 113°F, 30 ... 90% RH
Storage conditions: -20 .. 60°C / -4 ... 140°F, 30 ... 90% rh non-condensing
Heating time: About 15 minutes

1 x RTD Process calibrator PCE-RTD 20
3 x Laboratory cables with 2 mm plug
3 x 2 mm laboratory cables with alligator clips
3 x Adapter 2 mm on 4 mm laboratory cable
1 x Mini USB cable
1 x Power supply 5V / 1 A
1 x Carrying bag
1 x Software
1 x User manual