Peak Scientific - Model PG28L - Purge Gas Generator
From Zero Air Generators
The PG28L gas generators from Peak Scientific are suitable for laboratory detectors requiring CO2 free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology to remove organic contaminants and moisture from air, these generators provide a consistent flow of air to ensure little background noise in laboratory analysis. Requiring minimal maintenance, the PG28L does require an external source of air to operate, Peak Scientific will be able to help with recommending a suitable air source if your laboratory does not have one.
-
Most popular related searches
Features
- Purge Gas (PG) generators from Peak Scientific produce air which is free of CO2
- Ideal for commercial labs with a high throughput rate of samples
- High performance filters and PSA ensure maximum reduction of moisture (< -70ºC dew point).
- Few moving parts means minimum maintenance requirements and 24/7 performance
- Position generator where required, wall mountable for small labs
- More cost effective than any other gas supply as the FT-IR detector needs a constant flow of gas
- Completely silent in operation
- 12 month full comprehensive on-site warranty
Technical Specification
Gas
- Gas Type: Air
- Max Gas Flow: 28L/min
- Max Output Pressure: 100psi/6.9bar
- Max Purity: <1ppm CO2
Site & installation
- Gas Outlets Fitting: 1/4” BSP Female
- Min Inlet Pressure: 100psi/6.9bar
- Max Inlet Pressure: 120psi/8.3bar
- Power Consumption: 240 W
- Voltage: 120 - 240 ± 10% V
- Frequency: 50 / 60 Hz
- Current: 0.08 A
- Particles: < 0.01 µm
- Accreditations: CE
Dimensions & weight
- Size (HxWxD) mm: 910 x 459 x 162 mm
- Size (HxWxD) Inches: 35.8 x 18.1 x 6.4 inches
- Generator Weight: 19kg / 41.8lbs
Service requirements
- Annual replacement of particulate filters
Customer reviews
No reviews were found for Peak Scientific - Model PG28L - Purge Gas Generator. Be the first to review!