- Home
- Companies
- Pem-Tech, Inc.
- Products
- PemTech - Model Ultra1000 - Wireless ...
PemTech - Model Ultra1000 -Wireless Toxic Gas Sensor & Oxygen Deficiency Detector
The Ultra1000 Wireless is a battery operated detector to monitor toxic gases in ambient air. The interface and the Radio Transceiver are housed in a flame proof instrument enclosure. The detectors monitors a variety of toxic gases in the parts per million (ppm) range, including: ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen, hydrogen chloride, hydrogen sulfide, nitric oxide, nitrogen dioxide, oxygen deficiency, and sulfur dioxide.
The unit is self identifiable to the network of other Pem-Tech gas detectors and wireless controller / monitor. The unit communicates with the controller by transmitting complete data packet including the live gas concentration reading and the sensor diagnostic data such as low battery, sensor fault, and calibration mode.
- Auto detect network; units come online automatically
- Communicates with PT2008 Series Wireless Monitor or PT800 Series Gateway Bridge
- Easy user-friendly setup
- Single point calibration; menu driven calibration and configuration
- Solar powered with internal NiMH battery and integrated battery charger
- Complete data communication with controller including gas reading and diagnostic data
- Available for toxic and combustible gases
- Classification
- Class 1, Div 1, Hazardous Location
Explosion proof instrument enclosure with 216 stainless steel detector head assembly
- Class 1, Div 1, Hazardous Location
- Sensors*
- Hydrogen Sulfide: 100 ppm
- Carbon Monoxide: 100 ppm/1000ppm
- Oxygen: 25%br />
- Sulfur Dioxide: 50 ppm
- Combustibles: 0 to 100% LEL
- *Contact manufacturer for other sensors
- Operating Frequency
- 900 MHz ISM Band
2.4 GHz ISM Band
- 900 MHz ISM Band
- Operating Range
- 300 meters (line f site) with dipole antenna
Up to 17 miles with high gain directional antenna and extended battery pack
- 300 meters (line f site) with dipole antenna
- Input Power
- Solar Array 5 watts 6 volts
(Optional: external 12VDC)
Battery powered with 3.6-volt disposable lithium battery
- Solar Array 5 watts 6 volts
- Display
- 2 X 8 LC display
- Calibration
- Easy menu driven single point, single person calibration
- Operating Temperature
- -40°C to +70°C
- Operating Humidity
- 10% to 95% relative humidity, non-condensing