Harvard - Model P-230 -Peristaltic Pump

Other benefits include:

• The ability to separate the motor drive from the controller to facilitate use and save space in incubators and fume hoods
• A library of tubing sizes is stored in the pump`s memory minimizing set up time 
• Custom tubing can be used allowing complete flexibility 
• A full range of interchangeable motor drives to allow for economical ease of use over a broad flow rate range. 

The Harvard Peristaltic Pump consists of a control unit, a motor drive, a tubing cassette and some sample tubing. The pump can deliver solutions over a range of flow rates from 0.001 to 1,500 ml/min depending on the motor drive used. Choose from three interchangeable motor drives. The motor drive modules provide flow over the following ranges:

• P-70 drive provides flow rates from 0.001 to 70 ml/min
• P-230 drive provides flow rates from 0.001 to 230 ml/min 
• P-1500 drive provides flow rates from 0.01 to 1,500 ml/min 

A complete range of programmable functions allow the pump to be easily adapted to a wide range of dispensing applications. The pump has pre-programmed flow profiles for:

• Constant Flow
• Flow Ramps 
• Pulsatile Flow 
• Concentration Based Fluid Delivery

• LCD color touch screen with intuitive icon interface for unparalleled ease-of-use
• Remote design ideal for work inside incubators and fume hoods 
• Interchangeable pump heads 
• A library of tubing sizes stored in the pump`s memory minimizes setup time 
• Custom tubing can be used allowing complete flexibility 
• Single channel or combined channel mode for setting flow rate 
• Pump mode—runs continuously at a set flow rate 
• Timed dispense—dispenses for a fixed time at a set flow rate 
• Volume dispense—dispenses a fixed volume 
• Footswitch control 
• Analog control 
• Bidrectional delivery 
• CE, ETL (UL, CSA), WEEE, EU RoHS and CB Scheme Approved 
• 2-year warranty

• The ability to separate the motor drive from the controller to facilitate use and save space in incubators and fume hoods
• A library of tubing sizes is stored in the pump`s memory minimizing set up time 
• Custom tubing can be used allowing complete flexibility 
• A full range of interchangeable motor drives to allow for economical ease of use over a broad flow rate range. 

The Harvard Peristaltic Pump consists of a control unit, a motor drive, a tubing cassette and some sample tubing. The pump can deliver solutions over a range of flow rates from 0.001 to 1,500 ml/min depending on the motor drive used. Choose from three interchangeable motor drives. The motor drive modules provide flow over the following ranges:

• P-70 drive provides flow rates from 0.001 to 70 ml/min
• P-230 drive provides flow rates from 0.001 to 230 ml/min 
• P-1500 drive provides flow rates from 0.01 to 1,500 ml/min 

A complete range of programmable functions allow the pump to be easily adapted to a wide range of dispensing applications. The pump has pre-programmed flow profiles for:

• Constant Flow
• Flow Ramps 
• Pulsatile Flow 
• Concentration Based Fluid Delivery 

In addition to the flow profiles, the pump has advanced user options that permit the pump to be controlled by a PC from its USB inputs as well as a range of options such as:

• Remote initiated start/stop times
• Communication with external devices through 15-pin I/O 
• Constant pressure through BNC 

All settings can easily be saved as user generated methods in the pump`s memory. The method can be easily recalled and run very quickly, saving researchers valuable time. Connectivity to a wide range of external input or output devices is easily accomplished. A constant pressure mode may be utilized in conjunction with a pressure transducer. The pump will automatically rotate at the proper RPM for the tube selection and flow rate chosen. To further increase the accuracy, Harvard Peristaltic Pumps offer a rapid calibration routine to further optimize flow accuracy by entering a measured volume of fluid collected.

• Description PumpwithP-230MotorDrive
• Type 8rollers,4channels
• Accuracy ±1.0%
• BackPressure 15psi
• ComputerInterface USBType`B`
• ControlBoxDimensions,HxWxD 20.7x13x9.6cm(8.13x5.13x3.75in)
• PumpHeadDimensions,HxWxD 16x23.6x11.8cm(6.2x9.3x4.63in)
• MaxRPM 235
• FlowRateRante(Min.toMax. 0.001mL/minto230mL/min
• Power 100to250VAC,50/60Hz
• ProtectionRating IP23
• PumpConfiguration Remote
• PumpVoltage 30VDC,1.67A
• PumptoPump IEEE1394
• ReversibleFlow Yes
• TTLConnector 15-pinD-sub
• TubingID 0.13to3.17mm(0.005to0.13in)
• Weight 5kg(11lb)