ENVEA - Model SpeedFlow 2.0 -Pipe Velocity Measurement, Material Transport Sensor

• Continuous speed measurement of solids (powder, granules, dust ) in metal pipes
• Measurement directly in the conveying stream / entrained flow
• Measurement is completely independent of material
• Sensor is made accordingly to the existing pipe diameter
• Measurement without product contact

• Plastic industry
• Tobacco
• Food

• Material to measure: Dust, powders or granulates
• Working principle: Correlation
• Process pressure: Max. 100 mbar
• Process temperature: Max. +45°C
• Mounting: Flare connection
• Type of Conveying: Pneumatic leanphase
• Velocity range: 1…35m/s
• Pipe diameter: Max. 350mm
• ATEX rating: None
• Output: 4…20mA, Modbus, Profibus

• Innerdiameter: DN: 80, 100, 150, 200, 250, 350
• (other sizes on request)
• Material inner pipe: PMMA
• Mechanical connection: JACOBS flange
• Protection category: IP 54
• Max. pressure: 100 mbar
• Velocity range: 1…35 m/s/td>
• Temperature inside the pipe: 0…+50 °C
• Temperatur outside the pipe: 0…+45 °C
• Power supply: 24 V DC
• Weight: Depend on diameter
• Measuring accuracy: ± 1 %
• (in the calibrated measuring range)

For the assembly of the sensor, the installation location is specified in accordance with the conveyed inlet and outlet paths. At the specified installation location the sensor is installed in the extisting pipeline via a standard flare connection. The distance between sensor and analysis unit can be a maximum of 300 m.