PMC - Surface Aerators
Impeller Diameter from 0.70 M to 3.6. Vertical shaft surface aerators are easily assembled on all types of fixed bridges. If water level is subject to any changes. Suction nozzle below the impeller increases the effective depth. If the ideal water depth is exceeded, the effectivedepth of Vertical shaft surface aerator can be increased by extending the suction nozzle or providing a draft tube. Vertical shaft surface aerators are manufactured in 18 different power ratings from 1.5 kW to 132 Kw.
-
Mounting plate Carbon steel
-
Shaft Carbon steel or stainless steel grade, AISI304, AISI304L, AISI316, AISI316L, AISI316Ti, DUPLEX, SUPER DUPLEX
-
Fan Carbon steel or stainless steel grade, AISI304, AISI304L, AISI316, AISI316L, AISI316Ti, DUPLEX,SUPER DUPLEX
-
Coupling between shaft and reductor: Carbon steel
-
Fastening materials A2, A4 , DUPLEX or SUPER DUPLEXHot dip-galvanised carbon steel / 304 L / 316 L SS
-
Vertical shaft surface aerators can be equipped with floating structure.
-
Immersion depth of standard Vertical shaft surface aerator can be adjusted between +-40mm and +-100 mm depending on the aerator model. Vertical shaft surface aerator speed can be automatically adjusted according to the oxygen requirement
or if there is more than one aerator, it is possible to operate only the necessary one. -
If more than one aerator is operated, various combinations can be made by means of electronic time control.