Basic Concepts, Inc.
PolySeam - Barrier Boom Oil Filtration Panels Passive Drainage System
If SPCC-compliant oil containment and filtration is required, the PolySeam Barrier Boom Oil Filtration Panels Passive Drainage System provides an innovative secondary containment solution. Using patented oil solidifying technology, the Barrier Boom panels allow rain and runoff to passively drain, but become an impervious barrier when it comes in contact with oil. Panels will immediately solidify, preventing any hydrocarbons from leaving the containment area.
Most popular related searches
oil filtration
drainage system
viscosity and temperature
secondary containment system
oil spill containment
secondary containment
oil containment
oil filtration system
oil drainage system
oil spill solidifier
- Complies with SPCC 40 CFR 112.7, U.S.D.A. Bulletin 1724E-302, Chapter 3-3.2.2 and 3.2.3, and IEEE Std. 980
- Custom designed to site specifics and PE-approved for full secondary containment
- Little or no maintenance required depending on type of install
- Service life of installed product: the life of the equipment it protects
- Estimated flow rate of up to 5 GPM per ft2 material with 1 foot head pressure
- Hydrocarbon flow rate of 0 GPM for 110% oil spill containment
- Solidifies approximately a half gallon of oil per ft2 depending on oil type, viscosity, and temperature
- UV resistance of 70% (typically covered with clean, washed stone)
- Oxidation resistance of 80%
- Contains 12 to 16 oz. of loose solidifying polymers per ft2 (unique quilting pattern prevents polymers from shifting during handling and installation)
Once considered difficult penetrations to encapsulate are now easily ENCAPSULAPED with the PolySeam System. Steel, concrete, round or square supports can be transitioned with NO problem!