Companies
DPS Instruments Europe GmbH
Products
DPS Instruments - Model Companion 4 - ...

DPS Instruments - Model Companion 4 - Portable Micro-Thermal Conductivity Detector Gas Chromatograph

The Companion 4 Portable Micro-TCD GC by DPS Instruments is an advanced, portable gas chromatography system designed for field analysis and continuous monitoring. Equipped with a micro-machined thermal conductivity detector, it can house up to four GC channels within an exchangeable cartridge. Each channel is self-contained, featuring a GC oven, analytical column, pre-column, and dual Micro-TCD detectors, providing comprehensive analytical capabilities. The integrated computer and rechargeable battery allow for autonomous operation, with the flexibility to connect to an external power source for prolonged use. Sampling, injection, and backflushing are automatically sequenced, enhancing operational efficiency. Designed to withstand field conditions, its water-tight carrying case ensures protection, while the compact design accommodates carrier and calibration gas tanks. Communication protocols include RS232, RS485, and Ethernet, with support for remote control via Modbus TCP. This system embodies the evolution of conventional GC systems, offering rapid analyses and precise control in a portable format.

Portable:

Water-tight Carrying Case (52 x 40 x 21 cm)
Approximately 15 Kg
Carrier Gas Tanks
Calibration Gas Tank
Rechargeable Battery
Built-in Computer

Micro GC Channels:

1 – 4 Micro GC Channels in an Exchangeable Cartridge
Each GC Channel contains GC Oven, Analytical Column,
Pre-Column, 2 Micro-TCD Detectors, Electronic & Gas
Connectors.

Software/GC Control Interface:

1 – 4 Micro GC Channels in an Exchangeable Cartridge
Enter and store GC Methods via Computer connection
GC Methods run without Computer connection
Safety Limits on all user entered parameters
Communications: RS232, RS485, Ethernet, Digital I/O
Protocols: Modbus, TCP
Sequencing for Sampling, Injection, Backflush, etc.
Memory Storage – up to 256Gb
Control for Carrier Gas(s)
Control for Valves (Injection, Backflush, Sample)
Schedule Auto-calibration
Control for Stream Selection
Digital Signal Outputs for each Detector
Universal voltage input (85 – 240 Vac, 50-60Hz)
Power Supply – (20 – 28 Vdc)
Power Consumption – 75 Watts maximum

Detectors:

1 – 4 Micro-TCD Detectors Installed
2 Micro-TCD´s per Channel (8 total)
Detection Limits (500ppb – 100%)
150 oC Temperature Limit with 0.1 oC set-point resolution

Injectors:

1 Micro-machined Injector per Channel
Sequence Controlled Injection Time

Columns:

1 Pre-Column with Backflush per Channel
1 Analytical Column
Isothermal Operation
Repeatability – < 0.05% RSD
Cycle Time (Typical) – 15 – 60 sec
Optional Temperature Program

Control Module:

Moisture – (5 to 95 %)
Operating Temperature – (5 to 55 oC)
Storage Temperature – (-20 to 60 oC)
Dimensions – 20 X 15 X 10 cm
Weight – 8 Kg

Gas/Sampling:

Gas Ports – 1/16″
Carrier – Helium, Argon, Nitrogen, or Hydrogen
Carrier Input Pressure – 450 kPa
Carrier Consumption (Typical) – 15 mls/min
Sampling – Pressurized or by internal Vacuum Pump
3 Sample Streams (more optional)

DPS Instruments - Model Companion 4 - Portable Micro-Thermal Conductivity Detector Gas Chromatograph

Details

Rugged Portable Micro-TCD Gas Chromatograph

1 to 4 GC Column Oven/Micro-TCD Channels

2 Micro-machined Thermal Conductivity Detectors (TCD) per Channel

Designed for Unattended Continuous Operation

Most analyses in less than 1 min

Rechargeable Battery

Built-in Computer

Integrated 3-Stream Selector

Automated Calibrations

Fast & Accurate with Low Maintenance

Built-in Instrument Diagnostics

Easy Chromatography Data System

Temperature Control to 0.001°C

Pressure Control to 0.001 kPa

Ultra Compact and Lightweight

Water-tight Carrying Case (52 x 40 x 21 cm)

Approximately 15 kg

Compact gas tanks, sold separately

Specifications

Portable:

Water-tight Carrying Case (52 x 40 x 21 cm)

Approximately 15 Kg

Carrier Gas Tanks

Calibration Gas Tank

Rechargeable Battery

Built-in Computer

Micro GC Channels:

1 – 4 Micro GC Channels in an Exchangeable Cartridge

Each GC Channel contains GC Oven, Analytical Column,Pre-Column, 2 Micro-TCD Detectors, Electronic & GasConnectors.

Software/GC Control Interface:

1 – 4 Micro GC Channels in an Exchangeable Cartridge

Enter and store GC Methods via Computer connection

GC Methods run without Computer connection

Safety Limits on all user entered parameters

Communications: RS232, RS485, Ethernet, Digital I/O

Protocols: Modbus, TCP

Sequencing for Sampling, Injection, Backflush, etc.

Memory Storage – up to 256Gb

Control for Carrier Gas(s)

Control for Valves (Injection, Backflush, Sample)

Schedule Auto-calibration

Control for Stream Selection

Digital Signal Outputs for each Detector

Universal voltage input (85 – 240 Vac, 50-60Hz)

Power Supply – (20 – 28 Vdc)

Power Consumption – 75 Watts maximum

Detectors:

1 – 4 Micro-TCD Detectors Installed

2 Micro-TCD´s per Channel (8 total)

Detection Limits (500ppb – 100%)

150 oC Temperature Limit with 0.1 oC set-point resolution

Injectors:

1 Micro-machined Injector per Channel

Sequence Controlled Injection Time

Columns:

1 Pre-Column with Backflush per Channel

1 Analytical Column

Isothermal Operation

Repeatability – < 0.05% RSD

Cycle Time (Typical) – 15 – 60 sec

Optional Temperature Program

Control Module:

Moisture – (5 to 95 %)

Operating Temperature – (5 to 55 oC)

Storage Temperature – (-20 to 60 oC)

Dimensions – 20 X 15 X 10 cm

Weight – 8 Kg

Gas/Sampling:

Gas Ports – 1/16″

Carrier – Helium, Argon, Nitrogen, or Hydrogen

Carrier Input Pressure – 450 kPa

Carrier Consumption (Typical) – 15 mls/min

Sampling – Pressurized or by internal Vacuum Pump

3 Sample Streams (more optional)

Each GC Channel contains GC Oven, Analytical Column,
Pre-Column, 2 Micro-TCD Detectors, Electronic & Gas
Connectors.