Jones Manufacturing Co.
- Home
- Companies
- Jones Manufacturing Co.
- Products
- Mighty Giant - Model 4100 - Power Unit ...
Mighty Giant - Model 4100 -Power Unit for Heavy Duty Commercial Use
Tub opens hydraulically for servicing and changing the screens. Tub hydraulic system uses a variable displacement hydrastat pump with electronic speed control for forward and reverse. Tub is chain driven. Trouble free high capacity 14” discharge auger. Uses a rigid elevator that drives from the top with a rubber lagged pulley and hydraulically swings around to the side of the grinder for transportation. Elevators hydraulically raise and lower, and hydraulically swing side to side to make a wider pile or to fill trucks. Hammers have hard surfacing on all 4 edges so that they can be turned 4 times to use all 4 corners.
Most popular related searches
air filter system
wood grinder
exhauster system
air filter
wood waste
trough auger
disk mill
turning machine
displacement pump
screening system
- Standard Model 4100’s have a semi-hitch with air brakes and tandem axles with dual 255/75R22.5 tires and wheels.
- All engines have a heavy duty air filter system with a precleaner and a muffler on the exhaust system. All engines have a completely enclosed engine compartment.
- Jones Mfg. Co. purchases Caterpillar Extended Service Coverage (Warranty) for 5 Years or 5000 hours on new Caterpillar engines.
- Capable of grinding any type of Wood Waste or Mulch
- Handheld remote control allows the operator to control tub and elevator functions from the loader tractor.
- Engine: Choice of Caterpillar C15 or Caterpillar C18
- Grinder suspension: Air ride suspension 50,000 lb capacity
- Clutch: Fluid Coupling
- Size of mill cylinder: Choice of 26” x 48” or 28” x 50” or 28” x 56”
- Mill shaft diameter: 5 ½”
- Mill bearing size: 3 15/16” pillow block bearings
- Number of hammers: Varies with mill size and specifications
- Hammer Size: 1/2” or 3/4″
- Hammer Swing: 360 Degrees
- Number of mill pins: 6
- Mill pin size: 1 ¼” diameter
- Mill disk thickness: 1/2”
- Mill base: Constructed of rectangular tube with 1/2” plate auger trough sides and formed 1/4″ auger trough
- Tub floor and walls: Floor – 1/2″ Wall – 1/4″
- Tub drive: Hydraulic motor with Heavy Duty Chain
- Number of tub rollers: 12
- Elevator: Rigid
- Elevator size: 24” wide x 27’ long
- Elevator drive: Hydraulic motor with chain drive to rubber lagged pulley on top end of elevator
- Discharge auger: 14” diameter
- Screen size: Various sizes – Round hole or Slot Style
- Overall height: approximately 12’-0”
- Reversing engine fan assembly: Enables operator to clean the radiator without turning the machine off.
- 3/4″ Mill Disk
- 16” Discharge Auger
- Other engine options available, but must meet specification requirements for machine and approved by Jones Manufacturing Co.