PRATT - Model GN2040EZ -Container Chassis
41` Triaxle Combo Container Chassis for 20` or 40` Containers. PRATT was built on designing and manufacturing the lightest, strongest, and most durable Container Chassis in the industry. With hundred of different models, our container chassis are designed to haul a variety of sizes including but not limited to 8`, 10`, 12`, 20`, 40`, 45`, 48` and 53`. PRATT also offeres hydraulic tippers that can tip up to 45 degrees. We offer tandem axle, wide spread, tri-axle, and lowdeck models with a variety of options.
PRATT uses a specially engineered steel frame to reduce tare weight, increase payload, and lower operation maintenance. When producing your Container Chassis, PRATT uses the most advanced laser and plasma equipment available as well as the latest techniques in jigs and fixtures.
DIMENSIONS
- NOMINAL LENGTH 41`
- NOMINAL WIDTH 96"
- KING PIN LOCATION 17-1/2"
- FIFTH WHEEL HEIGHT 46-1/2"
- REAR DECK HEIGHT 48"
- LANDING GEAR LOCATION 141"
- NUMBER OF AXLES 3
- AXLE SPREAD 122" (Tri-axle)
- TARE WEIGHT 10,620 LBS +/- 3%
- FRAME RATING 75,000 LBS
- GVWR 70,000 LBS
- GCWR 80,000 LBS
STANDARD FEATURES
- MATERIAL Main Rails are of ASTM A514 (130,000 psi); all others are of ASTM A572 Grade 50
- MAIN RAILS Fabricated Continuous I-Beam with T1 top and bottom flanges.
- CROSSMEMBERS Fabricated crossmembers
- KING PIN 1/4" pick up plate with 2" diameter king pin.
- LANDING GEAR Two-speed 17" travel w/ low pro sandshoe
- TWISTLOCKS PRATT Twistlocks
- SUSPENSION Tri-axle 61" Spring suspension w/ undermount fabricated hangers
- AXLES 71-1/2" Track, 22,500 LBS each rated
- HUBS Hub piloted cast hubs
- DRUMS Cast drums
- BRAKES 16-1/2" x 7" quick-change brakes with non-asbestos lining
- WHEELS (12) 8.25" x 22.5" Steel Wheels
- TIRES (12) 255/70R22.6 16 Ply Radial
- BRAKE SYSTEM Vale system for service brakes. 4S/2M ABS System.
- ELECTRICAL 12 VOLT w/modular wiring and plug type connectors and 7-way pin electrical plug for system. Sealed wire Harnesses. Sealed grommets and lights.
- METAL PREP All metal surfaces are shot blasted and cleaned. All weld areas shot blasted prior to painting
- PAINT Zinc Rich epoxy Primer and Black Urethane top coat
- MISC Conspicuity Striping, 24x24 Pratt Mud Flaps, hubdometer