RHOSS - Model ADV Next Air 01÷16 -Professional Modular Air Handling Units 800 41000 m3/h

• Innovative, robust and self-supporting structure, made from a single 50 mm thick monocoque sandwich panel, with internal and external hot galvanised sheet metal and painted with oil-free polyester paint, highly resistant to corrosion. The internal surfaces are completely smooth in order to inhibit microbial growth and prevent the accumulation of dust.
• Self-extinguishing polyurethane resin based with a density of 48 kg/m3 injected polyurethane insulation. Euroclass Cs3d0 reaction to fire. 
• Stepped-type full-face front inspection sandwich panels are housed in the profile seat, with complete thermal cut interruption, a double soft PVC gasket that simultaneously guarantees resistance to leaks and prevents humidity, water or any other undesirable element to infiltrate the machine.
• The fastening profiles are made of new generation plastic (PVC-RAU). Produced on an exclusive Rhoss design, thanks to their geometry they ensure perfect thermal insulation of the structure and complete interruption in the thermal bridge, excellent resistance against exposure to light (UV) and weather conditions, guaranteeing exceptional resistance to ageing and corrosion.
• The condensate collection tanks are made of magnesium and aluminium alloy sheet metal, guaranteeing excellent resistance to corrosion. They are installed inside the structure of the machine and are completely isolated in this way.
• Thanks to the double tilt, complete drainage of the fluids is guaranteed, thereby avoiding any type of undesired stagnation.
• All the units are suitable to be installed indoors as well as outdoors.

Mechanical features EN 1886 achieved by the ADV Next-Air Range

• Mechanical Resistance D1
• Leakage (-400Pa) L1
• Leakage (+700Pa) L1
• Filter Bypass factor F9
• Thermal Transmittance T2
• Thermal bridge factor TB1
• STANDARD SET-UPS
• Each section is equipped with the following as standard:
• Pressure outlet that allows and facilitates the installation of any sensors and measurements of air performance required by the commissioning activities as specified by the reference LEED guide.
• Holes to pass the signal or power cables protected internally and externally by a multi-hole cable gland with IP 65D protection rating so as not to alter the mechanical performance of the machine in any way and to facilitate on site works.

MAIN COMPONENTS

• Heat recovery units
• Sensitive or enthalpic rotary recovery unit
• Crossed flow recovery unit with integrated bypass

Fans

• High efficiency backward blade fans
• EC Brushless freely rotating fans
• Plenum fan freely rotating fans

Filters

• Biocide Airsuite or standard G4 pleated synthetic filters
• Metal mesh flat filters G1
• Biocide Airsuite or standard rigid bag filters M6 F7 F8 F9
• Soft bag filters M6 F7 F8 F9

Heat exchangers

• Water-powered coils
• Electric coils

Humidifiers

• Evaporating pack humidifiers with throwaway water
• Evaporating pack humidifiers with recirculation pump
• Steam humidifiers with independent producer with immersed electrodes
• Set-up for installation of other types of humidifiers

Various sections

• Dampers for outdoor/mixing/ejection air intake with
• Servo controlled dampers
• Manual dampers
• Empty inspection sections
• Silencers