- Home
- Companies
- ProMinent GmbH
- Products
- ProMinent - Model Sigma X Control Type ...
ProMinent - Model Sigma X Control Type - Sigma/ 3 - S3Cb -Motor-Driven Metering Pump
Capacity range S3Cb: 182 – 1,040 l/h, 12 – 4 bar. The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.
The new Sigma X range – reliable, smart and connectible
The Sigma X diaphragm metering pump covers a capacity range of 21 to 1,040 l/h in versions S1Cb, S2Cb and S3Cb. Its patented multi-layer safety diaphragm guarantees maximum process reliability. Efficient protection of the power end from overloading by means of an integral frequency converter with microprocessor control(ler).
One highlight is the standardised operating concept with click wheel and 4 additional operating keys on a removable operating unit. A large illuminated LCD and a 3-LED display for operating, warning and error messages, visible from all sides, offers additional operating convenience.
The Sigma, like all smart ProMinent metering pumps, can be flexibly connected to various bus systems.
It has a large adjustment range thanks to a combination of frequency and stroke length adjustment. The pump works with high precision across the entire frequency range. Accurate and complication-free metering of viscous and gaseous media by adjustment of the movement profile.
Operating statuses are simply remotely transmitted via an additional output or relay module. A built-in timer, included as standard, controls time-dependent metering cycles.
Relevant spare parts can be shown in the display. The integral logbook significantly improves process management, optimisation and troubleshooting.
- Safe: In the event of an accident, the feed chemical does not escape to the outside nor into the pump's power end, thanks to the patented multi-layer safety diaphragm with optical (optionally electric) signalling.
- Integrated relief valve protects the pump against overloading and reliable operation by means of a bleed option during the metering process.
- External control is scalable via potential-free contacts with pulse step-up and step-down, batch mode or via a 0/4-20 mA standard signal.
- Flexible connectible: Connection to process management systems via integral PROFIBUS®, CANopen interface.
- Integral logbook saves up to 300 events and simplifies troubleshooting and analysis of the cause.
- Stroke length: 6 mm
- Stroke length adjustment range: 0 – 100%
- Stroke length adjustment: manually using self-locking rotary dial in 1 % increments
- With the right, constant conditions, correct installation and calibration, precision exceeds ±1 %, based on maximum stroke volume.
- Power supply: 1-phase, 100 – 230 V ±10%, 240 V ±6%, 50/60 Hz (420 W)
- Degree of protection IP 65
- Fibreglass-reinforced plastic housing
- Manual or external contact mode can be set, factor with external contact control 99:1 – 1:99; batch mode with max. 99,999 strokes/start pulse.
- Metering profiles for optimum metering results.
- Display of wear parts in the Service menu.
- Connector for 2-stage level switch.
- Connection to PROFINET using the ProMinent DULCOnvert PROFIBUS®-PROFINET converter
- Various relay modules can be selected.
- Variants with EU 1935/2004, FDA or hygienic design can be selected for food and other applications.
- Wetted materials: PVDF, stainless steel 1.4571/1.4404, special materials on request.
- Dosing heads with electro-polished stainless steel for aqueous media are available on request for applications with strict hygiene requirements.
- We are happy to supply alternative material versions to comply with export conditions for pump capacities of >600 l/h and PVDF.
- Customised designs are available on request.
For reasons of safety, provide suitable overflow devices during installation for all mechanically deflected diaphragm metering pumps.
The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.
- All industrial applications, either as a stand-alone unit or integrated in a complete system
- Volume-proportional addition of chemicals in water treatment, e.g. sodium hypochlorite for the disinfection of potable water
- Neutralisation in wastewater treatment
- Pulse-controlled metering in the bottling of different volumes e.g. glycerine filling of manometers
- With an integrated timer as a control unit for simple processes, e.g. biocide metering in cooling water