Jing Ltd.
HiMass - Model CAST Series 7200 -Real Combustion Soot Particles
FromJing Ltd.
HiMass CAST has been constructed for applications with specific requirements on higher total flow rate and total soot mass output. Followings are some examples of the applications for HiMass CAST: Filter testing. Charging filter / loading DPF. Exhaust gas simulation. CVS calibration. Smoke simulation.
Most popular related searches
soot particle
particle sizing
flow rate totalizer
particle size distribution
ambient air
combustion particle
filter testing
diesel soot
safety system
aerosol flow
- Real combustion soot particles
- Diffusion flame
- Fuel: propane, butane or liquid fuel (diesel, gasoline) with special burner on request
- Rapid adjustable particle size in a range from 20 to 200 nm
- Up to 10 g/h soot mass output or higher on request
- Particle number concentration up to 108particle/cm3
- Both unimodal and bimodal size distributions possible
- 3 default operation points (particle size and mass concentration remain on request adjustable for user configuration)
- High stability and repeatability in size and concentration
- Reproducible physical and chemical characteristics
- No condensation of water in the particle stream
- No soot contamination within the main device
- Operation pressure: free for open and sealed system, optional up to 500 mbar, or higher on request.
- Sufficient exhaust amount, total flow rate of undiluted exhaust gas: 500 l/min, additional dilution possible on customer request
- Internal ignition with flame safety device
- Sight glas for flame inspection
- Easy handling and portable
- Smart design with 1.3 m and 0.3 m2 (H x S)
- •height of particle outlet: adjustable 40 – 120 cm
- •burner mobile on a separate plat form for remote operation
- •internal ignition and with flame failure device
- •sight control of the flame
- •red button for emergency stop of total system
- Soot particle: similar morphology to diesel soot particle
- Particle size range: 20-200 nm, >300 nm with suppl. Equipment (optional)
- Particle size distribution: mono-modal
- Concentration range: up to 108 particle/cm3
- Undituted Smoke/Exhaust gas: 500 l/min (30 m3/h)
- Flow rate of dilution: min. 1500 l/min (90 m3/h) recommended
- Mass output: up to 10 g/hour or higher on request
- Temperature of aerosol flow: 70-140 ºC
- Mass determination / Calibration: gravimetric analysis of soot sample on filter
- Repeatablility: <5%
- Fuel requirement: Oil free, industry quality
- Oxidation and dilution air: Ambient air
- Quench gas: Ambient air
- Power requirements: 115/220V
- Device dimension (LWH): 130 cm x 65 cm x 55 cm
- Accesories: HiMass CAST Software, manual, mobile plat-form