- Home
- Companies
- BPC Instruments AB
- Products
- BPC - Model DAQ - Real-time Process ...
BPC - Model DAQ -Real-time Process Monitoring
BPC DAQ enables real-time acquisition of analogue sensor data alongside gas production measurements, with all signals collected and stored in the BPC Go software.
The BPC DAQ is the newest accessory for your BPC Go system. The unit connects directly to BPC Go and can be equipped with up to four analogue sensors, including:
- Temperature
- pH
- ORP / redox pontential
- Other analogue or digital process parameters
In the BPC Go software, signals from all connected sensors are collected and stored. The BPC DAQ extends the use of BPC Go by enabling monitoring of additional real-time parameters alongside gas production.
With plug-and-play functionality, the BPC DAQ allows straightforward integration of analogue sensors with the BPC Go system. The unit is equipped with four analogue ports with automatic passive and active signal detection, allowing connection to a wide range of commercially available sensors without manual configuration.
Integration
Direct connection to BPC Go for power and data handling.
Compatibility
Supports analogue sensors with automatic signal detection.
Configuration
Sensor units and sampling configured in BPC Go software.
Stability
Compact design with anti-slip base for lab use.
Article No. 303-0001-00
- Compatible Main Unit: BPC Go
- Analogue Inputs: 4 x DC jack 2.5/5.5 mm (4-20 mA); automatic passive/active detection
- Digital Input: 1 x RJ12 connector
- Sampling Frequency: From 1 minute and upwards (configured using BPC Go)
- Operating Mode: Passive data acquisition (requires BPC Go connection)
- Power Supply: Fixed USB-A cable from BPC Go (5 V DC)
- Material: Plastic enclosure with embedded electronics and metal screws.
- Anti-Slip Base: EPDM rubber pad
- Dimensions: Ø 74 mm × 32 mm
- Weight: 90 g
- Operating Temperature: -20 to 60 °C
- Operating Humidity: 10–90% RH, non-condensing
- Operating Environment: Indoor use only