- Home
- Companies
- Recycling Equipment Manufacturing, Inc. ...
- Products
- REM - Model CC5B Series - Full Beverage ...
REM - Model CC5B Series -Full Beverage Container Destruction
Process `line rejects` or `out-dated product` and recover aluminum cans and P.E.T. containers for recycling with REM 5B Series Crushing System. Our CC 5B crushes aluminum cans while our CC 5B PERF processes both P.E.T. containers and aluminum cans. Each machine comes complete with an in-feed conveyor, totally enclosed crushing mechanism, capture tank with drain, and an out-feed conveyor with fresh water rinse.
Product is loaded on the in-feed conveyor hopper and is conveyed into the CC 5B or CC 5B PERF where the containers are crushed and the fluid is discharged into the capture tank. The empty beverage containers are then removed via the out-feed conveyor belt where they run under a fresh water rinse aiding in the removal of residual fluids. The containers are then emptied into a REM CB Can or P.E.T. Bottle Blower, a container, or a baler.
- Second generation field-proven design for high volume, low maintenance, and easy service
- Enclosed tail pulley cover with external take-ups for correct belt tracking and tension
- Low in-feed hopper for easy loading/visual inspection
- Enclosed belt and chain guards for user protection
- Fresh water rinse on out feed conveyor
- Processes up to 600 cases of aluminum cans per hour.
- All steel unitized construction
- PVC-150 conveyor belting with vulcanized cleats and Flexco 125 Megalloy Lacing
- 8” diameter head pulley, and 6” diameter crowned tail pulley
- 6” industrial steel casters
- Enclosed sides and bottom of belt return pan
- 1/2 HP TEFC conveyor motor
- 5 HP TEFC crusher motor
- 240/480 volt, three phase
- Electrical components are UL listed
- NEMA-4 (hose proof) enclosure
- Sequential manual start motor controls
- Main safety fused disconnect
- Individual motor overload/short circuit protection
- Safety interlock on crusher access door
- Height (A): 8’ 4”
- Length (B): 16’
- Width (C): 3’ 8”
- Loading height (D): 3’ 4”
- Weight-approx. (lbs): 2100
- Hopper capacity: 1/3 cu. yd.
Conveyor:
- Discharge height: 4’ 5”
- Belt width: 16”
- Cleat size: 1-1/2”
Crushing drum:
- 16” wide, welded steel cleats
Density:
- 2-4 lbs. per cubic foot for aluminum cans
- 240 volt, single phase
- Stainless steel upgrade
- 208, 380, 415, 480, or 575 volt, three phase
- Power cord
- Custom conveyors, hoppers, discharge heights
- Pump for fluid capture tank
- Wash-down duty bearings
- If you don’t see it, ask us!