Reporoa Herdflow - Rectangular Top Gate

Basic Controls Located in shed. Electric curtain up, down; gate forward, reverse

Most popular related searches

Electrified Curtain Chains electrified when chains are lowered.
"1" Beam Can drive on "1" beam or channel (Excludes cost of "1" Beam or channel).
Electric Curtain Lowering Chains are lowered by button control from consol in shed.
Audible Alarm An electronic alarm is located in the control box on the gate to sound when the gate is moving. Provides an audible prompt for cows and advises operators which mode the gate is operating in.
Electrical and Mechanical Installation The HRYETG is installed and operational provided electricity is supplied to front of yard. Excludes "1" beam or channel to run on. Posts must be correct height, straight and parallel.
High/Low Rail Options The HRYETG can be built for 1200mm to 1700mm high top rail.
Anti De-Rail Design Drives on top of "I" beam and clamped on with front and back side mounted idler wheels. Only on "I" beam option.
2 Speed Reverse Faster reverse speed available by holding down button for 2 seconds.
Pulse Forward Auto Stop Gate travels forward a predetermined distance then stops until commanded again.

Four Wheel Drive An additional 2 drive units can be added to provide additional traction. Useful in extreme icy conditions or steep yards.
Additional Audible Alarm An additional alarm can be supplied at the front of the yard to provide another prompt for the front cows to move as the gate moves forward. Excludes wirinq in.
Pull Cord Stop Start Available only in herringbone sheds. Allows basic gate operations to be controlled bv a pull cord as well as a consol. Excludes wiring in.
Dual Controls Provides an additional set of gate controls to be located at cups off position. Excludes wihnq in.
Gate Clash Sensors Can be fitted to both gates to make gate stop

Features