- Home
- Companies
- KRENN Environmental Technology
- Products
- KRENN - Reverse Osmosis
KRENN - Reverse Osmosis
Water treatment with reverse osmosis in gastronomy. Water treatment for dishwashing systems, glass washers, combi steamers, pressure steamers, convection ovens, coffee and ice cube machines. Your fine crockery, glass and cutlery will be cleaned more gently and economically. Without manual rubbing you get a brilliant gloss drying result. You also save on detergents and polishes. In today`s hotly contested gastronomy market, it is more important than ever to convince your guests with an optimal and perfect offer and thus to positively differentiate yourself from your competitors. Because of its diverse areas of application, water plays a central role here, both in the preparation of food and drinks and in the cleaning of dishes, glasses and cutlery. With the use of our water treatment systems, you will be able to achieve top results.
Suitable for desalination of drinking water
Powerful reverse osmosis system for direct connection to on-site drinking water to supply a downstream consumer with direct pressure increase or through a hydraulic tank.
- installed in a 300 mm wide stainless steel cabinet part (can be built under)
- Compact dimensions, high performance, low noise
- suitable for direct connection to raw water - without separate upstream softening
- no consumption of regeneration salt
- Installation costs are significantly lower than with conventional reverse osmosis systems
- the pre-treatment is carried out by a hardness stabilization unit
- maximum pure water yield: up to 280 l/h
- Saving of detergent and rinse aid
- low operating costs
- Optimum protection of the dishwasher against calcification and other deposits
- Stain-free glasses and cutlery
- Saving of chemicals, thereby active environmental protection
- Easiest operation with maximum operational reliability
- Uncomplicated installation and commissioning
- Also suitable for machines without their own pressure increase
- up to 70% product
- TFC membrane
- Champ membrane housing
- Booster Pump (Stainless Steel)
- automatic low pressure switch
- automatic computer controller
- digital LCD display
- automatic conductivity monitoring
- automatic flushing system
- stainless steel case
- automatic flow counter (minutes)
- Solenoid valve at the water inlet
- Leak Monitoring System
- Width 295 x depth 600 x height 530 mm
limits
- Minimum admission pressure: 1 bar
- maximum pre-pressure: 3 bar
- Operating pressure: 8 to 10 bar
- Inlet water temperature: 1°C - 30°C
- Max. salt content in input water: 3,000 ppm
- All system parts are protected in a stainless steel housing on rubber-mounted feet (optional castors).
- BS 80 80 - 110 liters/ hour
- BS 160 160 - 220 liters/ hour
- BS 240 240 - 330 liters/ hour
- BS 320 320 - 440 liters/ hour
- BS 400 400 - 550 liters/ hour
- BS 480 480 - 660 liters/ hour