Royal Eijkelkamp Van Der - Model 04.14 -Horst Core Sampler, Set

• Undisturbed sample
• Larger volume of sample
• Even less cohesive materials can be sampled

By hammering the sampler into the material (by hammer with nylon heads or slide hammer) the core is filled. When the sample enters the tube, the water or air trapped above the sample can escape through a non-return valve. The sample can be retrieved by using the support and lever beam with rope catcher. This set includes a hydraulic sample extruder, for effortlessly extraction of the sample.

Samples can be taken from bore holes, casing tubes (minimum diameter 75 millimetres) or in the beds of canals, lakes, etc. This sampler set is suitable for hammering.

Set contains

• Van der Horst sampler
• Sample tubes (15 pieces)
• Sample tubes for sand catcher (3 pieces)
• Sand catchers (10 pieces)
• Sample foils
• Sample tube covers
• Extension accessories, incl. hammering head
• Hammer with nylon heads, impact absorbing design
• Slide hammer `down the hole`
• Sampler extraction set
• Hydraulic sample extraction set
• Sample gutter
• Operation, cleaning and maintenance accessories
• Transport case

• Sampling above and below groundwater table
• Sampling for soil technical measurements (compressibility, determination of shear strength)
• Soil physical measurements
• Determination of the granular composition
• Chemical analysis, e.g. through leaching tests using the special connection set
• Visual impression
• Soil profile research

• Connection: Screw thread
• Maximum sample depth: 7 m
• Product material: Stainless steel, steel, other material
• Sample diameter: 67 mm
• Sample length: 44 cm
• Sample specification: Undisturbed
• Sample stored in: Tube
• Sampler position: Vertical
• Package size: 146 x 64 x 50 cm
• Weight: 96 kg