- Home
- Companies
- Grünbeck Wasseraufbereitung GmbH
- Products
- GENO-STOP - Safety Devices
GENO-STOP - Safety Devices
GENO-STOP protects against water damage in single-family and two-family houses. The device can be used as a stand-alone safety device or in conjunction with the BOXER filter series. The robust GENO-STOP is easy to install and operate. Sensors continuously monitor critical locations in moisture-prone rooms such as the kitchen and bathroom. If water collects on the floor, the sensor reacts and signals the water leakage to the GENO-STOP, which in turn shuts off the feed line. Power is supplied via conventional AA batteries, and connection to a power supply is not necessary. GENO-STOP can be installed in the horizontal or vertical feed line, as desired. It can be fitted with up to two wired sensors.
- Can be installed in horizontal or vertical feed line
- Battery-operated
- DVGW-certified
Please note local installation directives, general guidelines and technical specifications. Protect devices against frost.
Every GENO-STOP® is delivered complete with
- Installation material
- Wired water sensor with 2 m cable
- Batteries and operation manual
A second water sensor with a cable length of up to 10 m can be connected (optional). It can be supplied either with or without* connection flange, water meter screw connections and end plate (*can only be installed/retrofitted in conjunction with a BOXER®).
- Water sensor with 2 m cable
- Water sensor with 10 m cable
- Power supply plug for GENO-STOP®
- Angle-type flange GENO-STOP®
For further information on installation requirements and scope of supply, as well as technical details, see the product data sheet, which is available to download.
