- Home
- Companies
- Saifilter Filtration Technologies
- Products
- Saifilter - Wedge Wire Screen Panels
Saifilter - Wedge Wire Screen Panels
Saifilter industrial filter manufacturer can design, manufacture, and market all kinds of wedge wire screens for industrial applications. The basic structure is the welding or annular plate made by stainless steel or other alloys. The wedge wire is welded on the supported proximate matter by metal wire resistance with a V-shaped surface. The distance between the surface grooves is accurately controlled to allow the formed filter liquor flow through the V-shaped grooves and ensure the desired particles are reserved by the accurate size of the grooves. The wedge wire screen panels allow the filter liquor to flow evenly and at low speed across the screen surface, almost eliminating screen clogging.
By using a lower through-tank velocity, the solid particle with a given size will not be sucked into your technological process or clog the outer surface of the inlet screen. Almost unlimited amounts of cleanability can be provided by backwashing. The filter cakes and filtered particles are removed by reverse flow. The wedge wire filter is an ideal solution for separating solid from liquid, medium reservation, filtration, screening, dehydration, collecting, and distribution. This makes wedge wire screens the best applications of water treatment and processing industry.
Different kinds of wedge wire screen filters are provided by Saifilter. According to the different flow direction of the filter liquor, the wedge wire can be made by reserve twining or conventional outer surface. According to your requirement, the wedge elements can form screen nozzle, full lateral drainage system, resin trap screen, etc. to meet a variety of separate applications. We custom-make these products according to your exact specifications and offer a relatively low cost and high-performance solution for screening applications. We are your ideal wedge wire screen suppliers.
Suitable for cylinders from 7/11"（40mm） to 60"（1524mm） with groove sizes starting from 0.02mm. It can be made into a variety of stainless steel and ELC grades as well as Alloys 400, C-276 and CB-20.
- Material：SS AISI 430，201，202，304，304L，316，316L
- Surface profile type：triangle line
- Supporting sectional materials ：round rod，rectangular rod，wedge-shaped line，triangle line
- Groove gap：0.02 mm-10 mm
- The width of the panel：500mm-2000mm
- The length of the panel：500mm-3000mm