Companies
OFS Online Fluid Sensoric GmbH
Products
SaveCost - Model C - Water Softener ...

SaveCost - Model C -Water Softener Control Heads Monitor

FromOFS Online Fluid Sensoric GmbH

SHARE

Is the "guardian" for a water softener that works specifically with CLACK® control heads. The parameterized hardness limit value is monitored and the regeneration of the columns is triggered at the CLACK® control head, if necessary. In addition to greater operational safety, the softener generates up to 160% more soft water with less flushing water and salt. This also reduces operating costs by up to 60%.

Most popular related searches

water softening

automatic monitoring

monitor soft water

monitoring & control on CLACK® softeners:

use for TWIN, WS 1.0; WS 1.5; WS 2.0 and WS 3.0
monitoring the amount of soft water produced with a hardness sensor
triggering forced regeneration when capacity is exhausted

at a glance

quality control operating mode
automatic change to quantity control (if required)
determination: additional yield of soft water, number of regenerations
automatic self-monitoring
chronological storage of operating data in the electronic operating diary (USB stick)
optional: LAN data interface (modbus)
optional: brine and salt storage tank control with alarm via e-mail (WLAN network required)

ideal solution for

water softener with CLACK® control heads

prevents

too much use of salt and rinse water
too many regenerations
unnecessary maintenance

optimal utilization of the softener columns
more soft water (up to 160%)
more operational safety
lower operating costs (up to 60%)
less rinse water and salt (ecological operation)

housing dimensions: 400 x 250 x 160 mm (W x H x D)
power supply: 100 … 240 V / 50 … 60 Hz
operating voltage: 24 V DC, about 20 watts
water hardness range raw water: 0.9 mmol/l to 8.9 mmol/l
threshold value range soft water: 0.009 mmol/l to 0.18 mmol/l
CLACK® types: TWIN; WS 1.0; WS 1.5; WS 2.0; WS 3.0