The Scentroid Flux chamber sampler (AKA Emission Isolation Flux Hood) is used to determine levels of emissions from solid or liquid surfaces. The SF450 has a 100% solid stainless steel construction to ensure zero cross-contamination. Flotation is achieved using 4 stainless steel floats eliminating the need for rubber tubes or foam making the unit easy to clean and maintain.
Flux Chamber Sampler Applications:
- Emission measurements from liquid surfaces such as settling tanks and off-spec ponds
- Emission measurements from solid surfaces such as compost piles and sludge
- Emission measurement from liquid active sources such as aerated lagoons
- Ideal for the sampling of corrosive sources e.g. with high benzene or H2S content
- Ideal for field operations that require quick decontamination
Built for Solid and Liquid Surfaces
The flux chamber has been designed for both solid and liquid surface sample collections
Stainless Steel
Chamber is made of 100% stainless steel construction – both parts and casing
Flotation Device
Stainless steel unit floats without the need of foam or rubber tubes for liquid sampling
Stainless Steel Fitting
Stainless steel fitting for clean air sampling, relief flow, and temperature probes
Extra Fitting
Extra fitting available for thermo-couple probe (sold separately)
Chain Handle
The Scentroid Flux Chamber comes equipped with a chain handle and a hoist ring for easy movement and transportation
How to Use:
- Connect the flux chamber sampler sweep airline to either nitrogen or zero air cylinder
- Move the flux chamber sampler to the sampling location and allow time for the 2 air exchanges inside the chamber
- Extract sample using a vacuum chamber. For aerated liquid sources, an air sweep may not be required
Construction: 450 mm diameter with an enclosed surface area of 0.1555 sq meters
Material: All stainless steel construction including floaters for optional decontamination
Fittings: Standard fittings designed for 1/4" or 12mm OD PTFE tubing for sweep and sample air (custom fitting sizes available)
Additional Fittings: More fittings available for pressure/temperature sensors (specified at the time of ordering)
Port: Dedicated pressure relief port