Scentroid - Model SW60 -Wind Tunnel Sampler

The Scentroid SW60 is the next generation of wind tunnel samplers (a.k.a. ventilated sampling hoods), used for sampling on solid or liquid surfaces with passive odour emissions in accordance with both EN13725 and VDI3880. Our SW60 wind tunnel sampler offers a number of unique features that make it the most accurate and user-friendly area source sampler in the world.

Continuous Air Speed Monitoring
Scentroid SW60 wind tunnel sampler has a built-in anemometer, which remotely monitors the exact wind speed within the tunnel. Data is logged and shown on any mobile tablet or phone. This not only significantly increases the accuracy of odour sampling, but also provides a means of setting the airspeed to the exact desired value.

Designed for Toughest Conditions
Scentroid’s wind tunnel sampler is made of state-of-the-art PTFE coated aluminum composite material that is both extremely rigid and ultra-light. The wind tunnel only weighs 10 kg resulting in it being very easy to handle by a single technician. Despite being extremely light, the composite material makes the SW60 Wind Tunnel Sampler tough enough to withstand the toughest working conditions. SW60 Wind Tunnel Sampler can be utilized for wastewater treatment plants.

Lindvall Design Concept
The Wind Tunnel Sampler has been designed based off of the Lindvall concept, considered the industry’s most accurate wind tunnel design

Uniform Air Flow
The SW60 Wind Tunnel Sampler uses a series of 15 fins to direct the air speed within the chamber, ensuring complete uniform flow

Zero Contamination
The wind tunnel has been completely coated in PTFE aerospace grade aluminum composite with no plastic parts

Continuous Use for 1+ Hour
The SW60 Wind Tunnel Sampler battery pack can sustain the blower for 1.5 hours of continuous use

Removable Components
Designed to be handled and deployed by a single technician. The floaters can be dismantled and carried separately.

Variable Air Speed
The Scentroid SW60 has a variable air supply allowing the technician to set any air speed between 0.15 m/s to 1 m/s

Sources for Sampling: Liquid or solid passive (non-ventilated) sources
Electronic Interface: Direct 3.5mm jack
Wind Speed Range: 0.15 m/s to 1 m/s with 6" air supply and 0.15 m/s with 4" air supply
Battery Capacity: 1.5 hours
Charging Options: 12V DC car outlet, 100-240 volt AC power
Power Supply: Carbon filter, variable speed blower and flexible aluminum duct enclosed in a waterproof carrying case
Standards: VDI 3880, EN13725, AS4323
Sample Port: 1/4" 12mm stainless steel compression fitting
Removable Floaters: PTFE coated aluminum
Wind Tunnel Material: PTFE coated aluminum composite

Dimensions:
Weight: 10 kg
Size: 167 cm x 23 cm x 33 cm without floaters installed; 167 cm x 23 cm x 74 cm with floaters installed