Secutron - Model MR-2312-LDR -Twelve Zone LCD Conventional Fire Alarm Control Panel

SHARE

Two MR-2300-A Six Initiating Circuit Class A Converter Module may be used for Class “A” (Style “D”) wiring of the initiating circuits. One MR-2300-NC4 Four Indicating Circuit Class “A” Converter Module may be used for Class “A” (Style “Z”) wiring of the Indicating circuits. The MR-2312-DDR has a built-in UDACT/Digital Communicator and the cabinet will support up to 12 AH batteries. The panel can be semi-flush mounted with the optional MR-2312-FT trim ring.

Most popular related searches

fire alarm control panel

fire alarm control

signal converter

fire alarm panel

Comes With

12 Initiating Class B (Style B) c/w By-passing Switches
12 Bi-coloured Alarm LEDs & 12 Amber Trouble LEDs
4 Indicating Circuits(1.7 Amps) Class B (Style Y) c/w By-passing Switches
2 Line Udact Digital Communicator & Modem
Supports Multiplexed Annunciation & Smart Relays
Alarm & Event Logs
5 Amp Power Supply(Signal & Aux Supply)
Configurable Front Panel, Laptop or Remote Dial Up
Red Door and Black Enclosure

Listed to UL 864, 9th edition
Available in six and twelve zone models
Available in LED and LCD Display configurations
LCD Display versions are equipped with a 2 line by 20 character back-lit LCD display and numerical keypad
Integrated UDACT/Digital Communicator on select models
Front panel and PC programmable
LED Display versions are front panel (using CFG-300 configuration tool) and PC programmable
Remote upload/download capabilities
Base panel is equipped with Class “B” (Style “B”) initiating circuits which may be configured as Class “A” (Style “D”) using a Class “A” converter module
Initiating circuits may be configured as Alarm, Verified Alarm, Waterflow Alarm, Sprinkler Alarm, Latching or Non-Latching Supervisory, Monitor and Trouble-Only
Base panel is equipped with Class “B” (Style “Y”) indicating circuits which may be configured as Class “A” (Style “Z”) using a Class “A” signal converter module
Audible signals may be configured for Steady, Temporal Code, California Code and March Time
Indicating Circuits may be configured as Silenceable or Non-Silenceable for both signals and strobes
Built-in sync protocols for the following strobe manufacturers: Mircom, Amseco, System Sensor, Gentex, Faraday and Wheelock
Relay contacts for Common Alarm, Auxiliary/Alarm (Disconnectable), Common Supervisory and Common Trouble
Configurable Signal Silence Inhibit, Auto Signal Silence and One-Man Walk Test
Subsequent Alarm, Supervisory, and Trouble operation
RS-485 Interface for Remote LED Annunciators, LCD Annunciators and Remote Smart Relay Modules
Two event history logs comprised of a 200 event alarm log for alarm related events and a 200 event general log for all other events
5 Amp Power Supply
Optional modules for additional internal relay circuits and City Tie/Polarity Reversal
Optional trim rings for semi-flush mounting