Disab - Model SEBF-III -Semi-Mobile, Electrical Powered Vacuum Unit

The SEBF-III suction units meet the high demands from the industry due to its efficiency, reliability, ease of operation and maintenance giving excellent value for money.

The SEBF-III units are a series of electrical powered vacuum units that are mounted in a solid metal frame with telescopic legs. Together with a fixed pipe network this is a perfect central vacuum unit for smaller industry installations, but can also operate as a single suction unit using a 5“ or 6“ hose.

• Rigid design for industrial use.
• Filter system which can handle dry and wet material.
• Automatic filter cleaning without compressed air.
• Several options for filters and other accessories.
• Engine power ranging from 55 to 110 kW.
• Control panel placed in dust-tight enclosure.
• Optional discharge system for continuous discharge and closed handling.
• Telescopic legs adjustable in height to fit most dust receivers

A fork lift is usually available in all industrial companies and there are often bins available for dust and waste inside or outside the works. The SEBF-III discharge system can easily be connected to most bins, legs or similar, which makes the SEBF-III the most suitable choice. The high suction capacity together with it’s flexible discharge system makes the unit very useful in most vacuum cleaning situations. Due to it’s flexibility the unit gets access to most areas where cleaning needs to be carried out without the use of a fixed pipe network, and is also suited for material that shall be recycled or closed in bags and similar.

A fork lift is usually available in all industrial companies and there are often bins available for dust and waste inside or outside the works. The SEBF-III discharge system can easily be connected to most bins, legs or similar, which makes the SEBF-III the most suitable choice. The high suction capacity together with it’s flexible discharge system makes the unit very useful in most vacuum cleaning situations. Due to it’s flexibility the unit gets access to most areas where cleaning needs to be carried out without the use of a fixed pipe network, and is also suited for material that shall be recycled or closed in bags and similar.

Collected material in the filter unit compartment is emptied through either a mechanical bottom balance valve, or an optional pneumatic valve. A bin-level control can also be fitted. For discharging into a bag, hopper or other receiver, the legs of the unit are adjustable in height 1 m to allow placing a receiving bin under the discharge valve.

The units are equipped with a safety valve that through spring release opens at the max. vacuum. Unloading valves are mounted between the main filter system and the vacuum unit. The vacuum will immediately be equalised when the valves are opened and at the same the main filters will be cleaned. This will also prevent counter-rotation of the engine. The unloading valves will always automatically open at stop and start. They will also be activated by safety control functions.

All functions are controlled from the control panel and control LED:s and gauges will indicate the units operational status. The unit is handled by a fork lift, skip lorry or with a crane.

For general cleaning and bulk suction in any industrial application where high capacity is required together with flexibility, mobility, reliability and low noise level.

Manufacturers of Cement, Lime, Gypsum, Tiles, Concrete, Chemicals, Plastics, Fertilizer and Alumina. Foundries, Steel mills, Pulp-and Paper Industry, Quarries, Bakeries, Work Shops, Contractors, Shipyards…

• Vacuum pump: three-lobe rotary pump
• Max vacuum, mbar: 500
• Max overpressure, mbar: N/A
• Air volume m3/h (unloaded): 3450-5180
• Operation speed (rpm):
• Power: 55-90
• Voltage Frequency, V/Hz: 400/50
• Tank volume (m3)*: 1
• Total tank volume: 3m3
• Power source: Electric
• Engine type: N/A
• Tank material:
• Tank tipping: N/A
• Main filter system (m2): 30
• Safety filter surface(m2): 20
• Cooling air:
• Atex: On request

Weight and Dimensions**

• Complete unit (including chassis): 4 510 / 4 600 / 4 980kg
• Total unit length including tuck chassis: 3 360mm
• Total width: 2 290mm
• Height (incl. hose boom): 2 905mm