Dhairya Alloys - Model Monel K500 -Sheet, Plate and Coil

Monel K500 Coil has incredible mechanical properties at sub - zero temperatures, and can be utilized in temperatures up to 1000 Degree F, where its softening point is 2370 Degree F – 2460 Degree F. For the most part, its consumption opposition is generally excellent in diminishing conditions, yet poor in oxidizing conditions.

Alloy K500 plate offered by Dhairya Alloys are practically invulnerable to chloride - particle stress erosion breaking in normal conditions. It isn`t valuable in oxidizing acids, like nitric corrosive and nitrous. Alloy K500 sheets are assaulted in sulfur - bearing gases above around 700 Degree F and liquid sulfur assaults the alloy at temperatures over roughly 500 Degree F. All things considered, it is impervious to most antacids, salts, waters, food items, natural substances and barometrical conditions at typical and raised temperatures.

Monel K500 plate from Dhairya Alloys offers about a similar consumption opposition as nickel yet with higher greatest working pressing factors and temperatures and at a lower cost because of its better capacity than be machined. Completed creations can be delivered to a wide scope of mechanical properties when legitimate control of the measure of hot or cold working and the choice of suitable warm medicines is finished.

Monel Alloy K500 Sheets Supplier, Alloy UNS N05500 Flats, Monel Alloy K500 Plates Exporter, Alloy K500 Rolls, Monel K500 Plain Sheet, Monel Alloy K500 Coils Manufacturer in India.

Monel Alloy K500 Sheet, Plate and Coil

• Evaluations: Monel Alloy K500/UNS N05500
• Standard: ASTM B 127/ASME SB 127
• Size: 15NB to 150NB In
• Structure: Foils, Shim Sheet, Rolls, Perforated Sheet, Plain Sheet, Checkered Plate, Coils, Rolls, Strip, Flats, Blank (Circle), Ring (Flange) and so on
• Finish: Hot rolled plate (HR), SATIN (Met with Plastic Coated), Cold rolled sheet (CR), 2B, 2D, BA NO (8)

Difference Between Monel K500 Plate, Sheet & Coil

• Thickness greater than 0.15 mm and less than 6.35mm is called a Monel K500 Sheet.
• Thickness greater than 6.35 mm is called a Monel K500 Plate.
• Thickness less than 0.15mm is called a Monel K500 Coil.

Accessible Types of Monel Alloy K500 Sheet, Alloy K500 Plate and Monel Alloy K500 Coil

• Monel Alloy K500 Sheet
• Monel Alloy K500 Plate
• Alloy K500 Coil
• Monel Alloy N05500 Plate
• Alloy K500 Coil
• Monel Alloy K500 Flat
• Alloy K500 Shim Sheet
• Alloy N05500 Checkered Plate
• Monel Alloy K500 Strip
• Alloy K500 Cold Rolled Sheet
• Monel N05500 Hot Rolled Plate
• Monel Alloy K500 Circle
• Alloy K500 Plate
• Alloy N05500 Sheet
• Monel K500 Forging Ring
• Monel Alloy K500 Coil
• Alloy UNS N05500 Flat
• Alloy K500 Perforated Sheet
• Monel Alloy K500 Roll
• Alloy K500 Plain Sheet
• UNS N05500 Alloy Plate

Monel K500 plate uses

• Oil well industry
• Oil and gas production safety lifts and valves
• Sour-gas service applications
• Oil-well tools and instruments like drill collars
• Chains, cables, springs, valve trim, fasteners for marine service
• Pump shafts and impellers in marine service
• Doctor blades and scrapers

Alloy K500 Plate Features

• Non-magnetic alloy
• Excellent mechanical properties from sub-zero temperatures up to about 480C
• Resistant to a sour-gas environment
• Excellent resistance to high velocity sea water
• Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.