- Home
- Companies
- Sierra Instruments, Inc.
- Products
- Sierra - Model BoilerTrak 620S-BT - ...
Sierra - Model BoilerTrak 620S-BT -Thermal Mass Flow Meter for Boiler & Heater Efficiency
BoilerTrak is designed to provide an economical, easy-to-install solution for precise natural gas measurement for heaters and boilers to increase efficiency. The thermal mass meter is also suited for compliance with new regulations for burning natural gas and propane in commercial boiler applications.
- Optimized natural and propane measurement for 1, 2, 3, 4 inch sch. 40 pipe sizes
- 17,000 sfpm maximum velocity
- Easily install in the field or retrofit
- Certified for GHG measurement meeting EPA (40 CFR Part 98)
- Boiler MACT certified for area source boilers (40 CFR 63, subpart JJJJJJ) and for major source boilers (40 CFR 63, subpart DDDDD) Learn More.
EPAs GHG & Boiler MACT Certified
The BoilerTrak insertion flow meter is also ideal for compliance for Boiler MACT regulations for inlet fuel measurements for area source boilers (40 CFR 63, subpart JJJJJJ) and for major source boilers (40 CFR 63, subpart DDDDD). Learn More.
Developed as a fuel measurement solution for customers facing compliance to the California Global Warming Solutions Act of 2006, BoilerTrak™ meets all of the requirements for a stationary combustion fuel meter. This product is optimized for highly accurate and repeatable mass flow metering as mandated by the EPA, including:
- Methane (CH4)
- N20
- SF6
- HFCs
- PFCs
- CO2
Operating Principal: Thermal dispersion technology for direct mass flow measurement featuring: no pressure or temperature compensation needed, no moving parts, low pressure drop, high turndown. Watch the video...
EPAs GHG & Boiler MACT Certified
The BoilerTrak insertion flow meter is also ideal for compliance for Boiler MACT regulations for inlet fuel measurements for area source boilers (40 CFR 63, subpart JJJJJJ) and for major source boilers (40 CFR 63, subpart DDDDD). Learn More.
Developed as a fuel measurement solution for customers facing compliance to the California Global Warming Solutions Act of 2006, BoilerTrak™ meets all of the requirements for a stationary combustion fuel meter. This product is optimized for highly accurate and repeatable mass flow metering as mandated by the EPA, including:
- Methane (CH4)
- N20
- SF6
- HFCs
- PFCs
- CO2
Operating Principal: Thermal dispersion technology for direct mass flow measurement featuring: no pressure or temperature compensation needed, no moving parts, low pressure drop, high turndown. Watch the video...
- Flow-range adjustment and validation and diagnostics
- Field validation/configuration to ensure operating performance
- Flow totalizer and alarms
- 2 x 12 backlit LCD display totalizer value
- Remote enclosure mounting available
- Very low pressure drop
- No moving parts
- Free computer interface software
- Certified for Boiler MACT measurement meeting EPA regulations for area source boilers (40 CFR 63, subpart JJJJJJ) and for major source boilers (40 CFR 63, subpart DDDDD) Learn More.
- Measure all inert gases and all non-condensing clean gases
- Accuracy: +/- 1% of full scale
- Repeatability of +/- 0.2% of full scale
- Max Velocity:
- 17,000 sfpm (18-24V input power)
- 12,000 sfpm (15-18V input power)
- Probe lengths from 3.7" (9.3cm) up to 24" (61cm)
- Small-diameter, 3/8-inch (9.5mm) sensor probe
- Flammable gases: methane, propane, hydrogen, digester gas, natural gas
- 100:1 turndown
- Temperature:
- Gas: -40°F to 176°F (-40°C to 80°C)
- Ambient: -40°F to 120°F (-40°C to 50°C)
- Response time is 200 milliseconds to achieve 63% of final value
- Power Requirements
- 15V models operate 15-18 VDC (regulated) and 625 mA draw maximum
- 24V models operate 18-24VDC (regulated) and draw 850 mA maximum
- Output signals: Linear 0–5 VDC and 4-20 mA
- User definable pulse output for totalized flow
- Digital communications solutions include: Modbus RTU
- Enclosure NEMA 4X (IP65); remote electronics mounting available
- CE approved