ZENNER International GmbH & Co. KG
  1. Companies
  2. ZENNER International GmbH & Co. KG
  3. Products
  4. Zenner - Model ETKDI/ETWDI - Single Jet ...

ZennerModel ETKDI/ETWDI -Single Jet Dry Dial Meter with Pulser

SHARE
The ETKDI/ETWDI is a single-jet meter developed by ZENNER with the new D-register and equipped with a pulser permanently installed ex works. The individual advantage of the ETKDI is an exceptional compact design. With its very small height, the meter easily adapts to any installation situation.The EDKDI / ETWDI has a register with protected magnetic coupling and ensures an accurate collection of the meter data for the individual consumption billing in flats and apartments. The ETKDI / ETWDI is available with a 7-digit register and a pulse value of 10 l or with a 8-digit register and a pulse value of 1 l respective in the sizes Q3=2,5 and Q3=4. Due to the already preinstalled pulser the ETKDI / ETWDI enables remote reading of the meter data. Using a special add-on module it can be integrated into an M-Bus or radio system.
Most popular related searches
  • Dry dial register with shielded magnetic coupling
  • Equipped during manufacturing with a reed pulser
  • Low installation height
  • Model ETKDI for cold water up to 30°C
  • Model ETWDI for warm water up to 90°C
  • Counter equipped with 7 or 8 digits
  • Pulse value 10 l/Imp (7-digits) or 1l/Imp (8-digits)
  • Counter 355° rotatable
  • Operating pressure PN 16
  • For horizontal and vertical installation
  • Approved in accordance with MID
  • Measuring Principle Single-Jet Meters
  • Length without connectors 80 mm, 110 mm, 130 mm
  • Housing Material Brass
  • Register Dry Dial
  • Nominal Flow Q3 (≈ Qn) Q3=2,5 (≈ Qn 1,5), Q3=4 (≈ Qn 2,5)
  • Nominal Diameter DN (mm) DN 15, DN 20
  • Nominal Diameter (inch) 1/2 ", 3/4 "
  • Temperature Cold Water up to 30° C, Cold Water up to 40° C, Cold water up to 50° C
  • Hot sanitary water up to 90° C
  • Specified Units on Display Cubik Meters (m³)
  • AMR Technologies Reed Pulser
  • Metrological Class horizontal (max.) R 80
  • Metrological Class vertical (max.) R 40
  • Operating pressure (max.) MAP 16