Easy-to-use automatic water sampler that meets demanding requirements for programming, logging and connecting of external signals. The sampler is controlled by Bond–OO-checK external memory, with real time circuitry. Before you start the sampling, use a PC to select the required sampling mode in the BOND-oo-CHECK. Launch the sampler by connecting the Bond-OO-checK to the sampler. Once connected, use the button to calibrate the required sample volume. The sampler status is indicated by the button backlight and the three-color LED on the BOND-oo-CHECK. The used sampler operation system requires neither display nor keypad, ensuring easy operation.
While samples are being taken, the BOND-oo-CHECK stores sampling data (sampling time, filled bottle, sample taken, sample room temperature, flowmeter and other measuring units signal values, sample temperature and other data) that can later be uploaded to a PC, processed and printed as an amendment to the sampling protocol. Sampling is provided by a peristaltic pump.Before and after each sampling, the pump is reversed to blow the hose clean – the same occurs after the sampling. You may also wash the hose with the current sample for several times before sampling – the liquid is sucked up to the pump and discharged.
The SOFT SAMPLer can be equipped with a distributor that stores the sample in several containers. The containers can be grouped and used for example when preservatives are used. You may operate the sampler in modes based on time, flow, volume and phenomena. The Bond-OO-checK control unit features immediate sampling, delayed start or sampling scheduled to calendar days. In the phenomena mode, the sampling can be controlled by numerous signals (temperature from an external sensor, water level sensor signal, analog signal and digital input).