STM - Model ROC-TP2 -Touch Screen Rotor Oven Controller

A baking program starts with pre-heating followed by  5  process phases. In each phase can be specified baking Temp, baking Time, the damper closing and opening time,  steam injection modality  and the ventilator speed.   

A baking program can start automatically at the set time according to a weekly scheduler. 

A simplified baking cycle under the control of the operator can be activated manually.

The controller has on board the Internet connection for the device remote control through a PC, tablet or smartphone.

ROC-TP  has on board also a USB communication port for data back-up and restore (programs, parameters) and for exporting statistic data like baking cycles, switch-on time of main components, alarms. 

The user’s interface is  a  7”  to enhance usability. Each piece of information is clear and commands are given with a simple touch of the screen.  

ROC-TP is made of 2 parts: the touch screen which can be mounted on the oven’s shoulder and the actuator board to be mounted inside the electric board.

MAIN FEATURES:  

• Touch panel - power supply: 12 Vdc  by actuator board:  
• Panel dimensions: 132 x 200 x 53 mm (FRONT model):  
• Rear electronic case: Galvanized steel, thickness 0.8 mm:  
• Sealing: IP:  
• Actuator board - power supply: 12 / 115 / 230 Vac - 50/60 Hz:  
• Consumption: 16 VA:  
• Actuators board dimensions: 330 x 108,7 x 55 mm:  
• Operating conditions: Temp.0 ÷ 55°C, humidity 0 ÷ 95°C uR% (non condensing):  
• Weight:  :  

OPERATOR PANEL:  

• Touch screen capacitive technology: Colour TFT  7" - resolution 480x800 pixels:  

USAGE FEATURES:  

• Manual mode
• Automatic mode and user programs:  :  
• Memory storage: 99 programs:  :  
• Automatic cycle: 5 baking phases and extra baking time:  :  
• Automatic switch-on associated to weekly program:  :  
• Automatic and manual steam injection control:  :  
• Automatic and manual exhaust valve (damper) open/close control: ON-OFF/ percentage:  
• Steam generator control:  :  
• USB backup and restore data (programs, parameters, alarms):  :  
• Internet connection for monitoring and downloading statistics:  :  

ANALOG INPUTS - Probes: 

• Oven chamber temperature: Pt1000 :  
• Oven chamber  N. 2 or steam generator temperature : Pt1000 :  
• DIGITAL INPUTS - 24 / 230 Vac:  :  
• Burner alarm: NA:  
• Safety mechanical thermostat: NA:  
• DIGITAL INPUTS - contacts NA/NC:  :  
• Door switch: NA:  
• Trolley  switch: NA:  
• Damper open position: NA:  
• Damper closed position: NA:  
• DIGITAL OUTPUTS - electromechanical relays, res. A @ 230 Vac:  :  
• Heating (burner / resistances) stage 1: 8A:  
• Heating (burner / resistances) stage 2: 8A:  
• Light command: 8A:  
• Spare: 8A:  
• Damper opening: 8A:  
• Damper closing: 8A:  
• Steam solenoid valve (EV): 8A:  
• Vapour aspirator: 8A:  
• External buzzer: 8A:  
• DIGITAL OUTPUTS – TRIAC da res. A @ 250 Vac (max):  :  
• Fan speed 1 - command: 16A:  
• Fan speed 2 - command: 16A