Supmea Automation Co.,Ltd
- Home
- Companies
- Supmea Automation Co.,Ltd
- Products
- Supmea - Model SUP-LDG - Attached ...
Supmea - Model SUP-LDG -Attached Cooling Units
SUP-LDG Electromagnetic meters are a leading choice to deliver the performance and precision your applications require. These meters are applicable for all conductive liquids, such as water, acids, alkalis, slurries and many others. Typical applications are monitoring of liquids, filling, dosing and precise measurement in custody transfer.
Most popular related searches
electromagnetic flow meter
magnetic flow meter
flow meter
cooling system
pipe flow rate
PFAS
flow modeling
custody transfer meter
acid water
acidic water
- Pipe diameter: DN15~DN1000
- Accuracy: ±0.5%(Flow speed > 1m/s)
- Theoretical value: Water: Min. 20μS/cm; Other liquid: Min. 5μS/cm
- Recommended value: >30μS/cm
- Turndown ratio: 1:100
- Power supply: 100-240VAC,50/60Hz; 22-26VDC
- Minimal Maintainice. Has no moving parts or flow obstructiions, which virtually eliminates maintenance and pressure drops
- Product: Electromagnetic flow meter
- Model: SUP-LDG
- Diameter nominal: DN15~DN1200
- Nominal pressure: DN15 - DN250, PN ≤1.6MPa
- DN300 - DN1000, PN ≤1.0MPa
- DN1200, PN ≤0.6 MPa
- Higher pressure can be customized
- Accuracy: ±0.5% F.S. (Flow speed > 1m/s); ±0.5% F.S.±2mm/s (Flow speed <1m/s)
- Repetitiveness: 0.16%
- Liner material: Neoprene (CR), Polyurethane (PU), PTFE (F4), PFEP (F46), PFA
- Electrode material: 316L Stainless Steel, Hastelloy C, Hastelloy B, Ti, Ta, Pt
- Medium temperature: Neoprene: -10…+60? Polyurethane: -10…+60? PTFE/FEP: -10…+120? PFA: -10…+120?
- Power supply: 85-245VAC,50/60Hz, 22VDC-26VDC
- Structure type: Compact type, Remote type
- Ingress protection: IP65, IP68(remote type only)
- Product standard: JB/T 9248-2015
Mag meter works based on Faraday`s law, when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:
Where:
- E-Induced electromotive force
- K-Meter constant
- B-Magnetic induction density
- V-Average flow speed in cross-section of measuring tube
- D-Inner diameter of measuring tube