- Home
- Companies
- Fransgård Maskinfabrik A/S
- Products
- Fransgard - Model SV-2500 - Swath ...
Fransgard - Model SV-2500 -Swath Wilter
Since its introduction in Sweden in 2003, Fransgård's popular swath wilters have been continuously developed and adapted to the needs of customers, while more and more markets have become aware of the machine and its qualities, which has made Fransgård the market leader in this machine. The swath wilter is available in 2 models with either a v-belt or chain drive. Both models can be used to great advantage in grass, hay or straw and leave a high airy swath without impurities such as soil and stones. In short, you achieve: Better Crop Quality.
Efficient Swath Wilter with many benefits
The rotor is driven by 4 strong v-belts. It is fitted with a fixed 3-point suspension that can be tilted and swivel wheels. The large swath guards make it possible to move the swath up to 80 cm. The SV-2500CD has the same basic design as the SV-2500, but with chain drives instead of v-belts.
Bracket swath guard
The large, heavy swath guards are mounted in a reinforced bracket with 2 bolts and nuts.
Bolt, 3-point suspension
The main bolt of the 3-point suspension is galvanised and greasable, ensuring a long service life.
A drive shaft
35 mm drive shaft between the gearbox and brake wheel ensures optimal operation of the machine.
Spring wheel
The draw spring, which is mounted on the wheel bracket, provides a smooth movement of the wheel fork and ensures that the wheels are always turned during transport.
Flange bearing
There is a cast flange bearing at each end of the rotor that can be easily greased from the outside.
Gearbox
The robust angular gearbox has a standard vented plug and is well protected in the main frame.
Wheel suspension
The swivel wheel suspension can be adjusted in height without using tools.
Main frame
The shield above the rotor has a robust arched design with a curved edge on top. It is made in Domex 420 steel quality.
Hole for lubrication
Cut-outs in the v-belt guard allow easy access for lubricating the flanged bearings.
Hole bracket
2 hole brackets on the top of the shield allow for a customised adjustment of the swath guards.
V-belt
The 4 XPB v-belts are tightened via the large tightening wheel to provide optimal operation. The placement of the tensioning wheel helps to get even more power out of the belt drive.
V-belt guard
The v-belt guard protects the belts well and is fitted with a service hatch for checking the belts.
Chain drive
SV-2500CD has a chain drive and automatic brush lubrication instead of v-belts. This machine is also fitted with a spring bolt in the gimbal joint at the gearbox.
Lifting strap
The 2 lifting straps relieve the 3-point suspension during transport and can be adjusted via a spindle.
Lifting eye
The SV-2500 is fitted with 2 lifting eyes for towing the machine.
PTO hook
The PTO hook for use during machine parking is fitted as standard and is easily turned to the side when the machine is in operation.
Belt tensioner exterior
The belt tensioner on the SV-2500 is easily operated from the outside of the machine.
Rotor reinforcement
The rotor of the machine has 10 reinforcements mounted inside.
Rotor, internal
The 72 close-fitting pick-up springs have a small bend at the edge and are spaced equally to the shield all round, ensuring optimum flow through the machine and a perfect swath.
Rotor
The most powerful rotor on the market has 6 rows of springs and a diameter of 80 cm.
The spring rows can be replaced individually, as can the 72 springs.
Inclined 3-point suspension
The 3-point suspension can be tilted to the right or left side, allowing the swath to be moved up to 80 cm to either side.
Guard rotor
Wide and close-fitting guards around the ends of the rotor ensure that the material does not twist around at the ends.
Guard, exterior
The guard at the bottom of the shield can be removed to provide a 10 cm larger input into the machine, which is a great advantage when working in larger material volumes.
Swath guard
The large swath guards have a rolled arch at the bottom and thereby help to form a high airy swath. The guards can be moved in and out according to the amount of material and the desired position of the swath.
Spindle
2 powerful spindles mounted at the top of the 3-point suspension adjust the lifting straps, relieving it during transport.
Positioning bracket
The bracket for tilting the 3-point suspension is operated without use.
Positioning bar
The galvanised bar for adjusting the swath guard can be fitted in 6 holes on the machine and 3 holes on the swath guard
Support legs
Support legs for parking the machine are easily raised when the machine is connected and are thus always on the machine.
Top bar attachment
The top bar attachment has both a fixed hole and an elongated slot. The elongated slot makes the machine follow the terrain better when working on hilly fields.
Three-point
The very strong 3-point suspension is rolled in a hollow profile, which provides both high strength and a simple beautiful design.